on linecombustible analyzercharacteristic

• (4~20) mA analog signal output

• High brightness LCD alarm display on site

• Intuitive and accurate display of gas concentration

• Clear and friendly interface, easy to operate

• The concentration ratio, high and low alarm values, and reset function can be manually set

• The overall design adopts explosion-proof technology

• Adopting replaceable sensor probes

• Our company's sound and light alarm can be directly configured

on linecombustible analyzerparameter

• Display Method: LCD (Liquid Crystal Display)

• Alarm method: Sound and light alarm

• Detection principle: Imported infrared sensor, catalytic combustion, electrochemical optional

• Sampling method: natural diffusion type, pump suction optional

• Response time ＜ 10s

• Alarm volume>65dB (This product does not include sound and light alarm function, and requires optional sound and light alarm lights.)

• Power supply DC24V 50HZ

• Power consumption ≤ 3.5W

• Environmental temperature for use:- 40℃~+60℃

• Explosion proof level Ex d Ⅱ C T6 Gb

• Output interface three wire system

• Indication error ≤± 5% FS

• Installation method: fixed type

• Output signal 4-20mA

• ?

Application scope

● Offshore operation platforms and drilling platforms ● Refineries

● Petrochemical plant ● Compressed natural gas and liquefied gas processing

● Wastewater treatment ● Chemical plants

● Pump Station ● Thermal Power Plant

Maintenance

To detect combustible gas information, a combustible gas detector must communicate with the detection environment. Therefore, it is inevitable for various pollutants and dust in the environment to enter the detector, causing damage to the working conditions of the detector. The working environment of combustible gas detectors is relatively harsh, and many are installed outdoors. Poor maintenance can lead to errors or failure to detect combustible gas alarms. Therefore, regular cleaning and maintenance are important tasks to prevent malfunctions.