1

Working voltage

DC9V-36V

2

Working current

25mA@12V(Static current 10mA)

When not charged

3

Specification and size

L78.5mm *W23mm*H12mm

4

locate mode

GPSAnd LBS

5

position error

<10m(This data is for reference only. The positioning error is related to factors such as terrain and time in the area where the vehicle is located.)

This data is measured in the company's laboratory

6

Communication network

GPRS

7

Communication method

TCP

8

Working temperature range

-25℃~ +75℃

9

Storage temperature range

-40℃ ~ +85℃

10

Backup battery working time

0.5 hours

55mA/h

Location data reporting

Timed tracking

Return positioning information such as latitude and longitude at set intervals.

Vehicle status detection

Ignition/shutdown status

Each uploaded data packet contains the ACC switch status.

Vehicle power failure reminder

Turn on the backup battery, and when the host detects that the vehicle voltage is less than 5V, it will report a power failure reminder.

Low voltage alarm

When the host detects a vehicle voltage of 5-10V, it reports a low voltage alarm reminder

OVERSPEED

The platform sets the maximum speed limit value. When the GPS speed is greater than the set value, an overspeed alarm reminder will be reported

Oil circuit inspection

Support platform and SMS functions for cutting off and connecting fuel and electricity

Illegal demolition alarm

When the terminal generates a power failure alarm or triggers a visible light state, if both conditions occur within 2 minutes, an illegal dismantling alarm reminder will be reported

Other functions

Blind spot supplementary transmission function

The terminal is located and offline, storing up to 300 pieces of data. Upload when there is a normal signal online.

EPO assisted positioning function

The terminal supports EPO assisted positioning function to enhance the positioning effect.

Turning point supplementary transmission

When the direction angle of the device changes by more than a certain angle, immediately upload a position data to optimize the trajectory.

Remote Upgrade

Upgrade the butler remotely.

low-power consumption

dormant mode

The 3D three-axis acceleration sensor senses the real-time vibration status of the vehicle. When powered on, it is in motion mode. When the host has no vibration for 5 minutes, it enters static mode, and the GPS module is turned off. When there is vibration, it enters motion mode.