Name: ZEISS PRISMO
Brand: Zhejiang Langtong Precision Instrument Co., Ltd
Availability: InStock

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13362177588
Address

33 Xinwen Road, Gongshu District, Hangzhou, Zhejiang

Contact Now

ZEISS PRISMO

ZEISS PRISMO Bridge Coordinate Measuring Machine 1) Acceptance test probe length of 60 mm, probe tip diameter of 8 mm, also effective for these probes

Contact Supplier

More Products

Product details

Product Introduction

ZEISS PRISMO Bridge Coordinate Measuring Machine

1) The acceptance test probe has a length of 60 mm and a probe tip diameter of 8 mm, which is also effective for these probes (diameter 3x33 mm, medium 5x50mm, and diameter 12x92mm for PRISMO ultra)

2) Measurement length L unit: mm

3) Measure roundness on a 50mm diameter ring gauge at a measurement speed of 5mm/sec and filter with a power of 50 W/U

4) The measurement position is located near the calibration position

5) Precision combined with PRISMO ultra reference standard and reference sphere bending correction

6) Within the measurement range of 800/1000/600

7) Within the measurement range of 800/1200/600

1) The acceptance test probe has a length of 60 mm and a probe tip diameter of 8 mm, which is also effective for these probes (diameter 3x33 mm, diameter 5x50mm, diameter 8 x 114 mm, and diameter 12x92 mm) used for PRISMO navigator (in conjunction with CMM reference standards).

2) Measurement length L unit: mm

3) 1.2+L/350 at 18 ° C -22 ° C

4) ZEISS PRISMO 10 (Y>2400) at 18 ° C-24 ° C

5) Measure roundness on a 50mm diameter ring gauge at a measurement speed of 5mm/sec and filter with a power of 50 W/U

6) The measurement position is located near the calibration position

7) Suitable for ZEISS VAST XT gold

1) The specifications of ZEISS VAST XXT, TL1 : I=50, dia3 mm; TL3: I=60, dia. 5 mm; TL4: I=125, dia3mm

2) The unit for measuring length L is mm. For RDS, the measurement angle is A=0 ° and B=0 °

3) ZEISS PRISMO 10 (Y>2400) at 18 ° C-24 ° C

4) The scanning speed in roundness measurement is 5mm/s, and the filtering is 50 UPR

5) When using an optical probe, a contact probe (such as VAST XXT) is required for calibration

6) All specifications measured using ZEISS ViScan 1x lens

7) The detection error at the center of the measurement range on a suitable sphere (diameter 30 mm) with a dull surface. P[Form.Sph.D95 %:Tr:ODS]， Working distance information based on the center of the measurement range

8) Laser grade ZM: The laser beam that can be touched is within the visible spectrum range. As long as the burst time is short (0.25 seconds) and the optical instrument does not reduce the cross-section, it is safe for the eyes (such as magnifying glasses, lens elements, telescopes).

9) Using ZEISS PRISMO ultra for 68 seconds

1) Before using an optical measuring needle, it is necessary to calibrate it in conjunction with a contact measuring needle (such as VAST XXT)

2) Only applicable to PRISMO - not applicable to ZEISS PRISMO ultra.

3) ZEISS VAST XXT: depends on the module (TL1, TL3, or TL4).

4) It may be useful to limit the parameters of probe configuration depending on the application.

1) According to the properties of the foundation, there may be deviations from the given values

2) Optional base with a height of 830mm. Total height increased by 230mm

3) Optional Workpiece Load Capacity Enhancement Option (NSP)

4) The specifications are applicable to ZEISS VAST gold with a probe length of 60 mm and a tip diameter of 8 mm

5) Specification for ZEISS VAST gold without adapter board

6) 5, 8 or 10 mm depending on dry installation (installation or gradual insertion of steel plate). More information can be found in the installation manual.

Optional Coordinate Measuring Machines

Bridge type coordinate measuring machine

ZEISS SPECTRUM Scanning Measurement Platform

ZEISS PRISMO

ZEISS ACCURA

ZEISS MICURA Small Size * Precision

ZEISS CONTURA Compact

ZEISS XENOS

ZEISS SPECTRUM Mobile

ZEISS MICURA Mobile

ZEISS CONTURA

ZEISS PRISMO

ZEISS CONTURAZEISS ACCURA

Composite three coordinate system

ZEISS O-INSPECT322

ZEISS O-INSPECT543

ZEISS O-INSPECT863

Large gantry high-precision coordinate measuring machine

ZEISS MMZ G

ZEISS MMZ M

ZEISS MMZ T

Production of Coordinate Measuring Machines

ZEISS CenterMax

ZEISS GageMax

ZEISS DuraMax

Cantilever Coordinate Measuring Machine

ZEISS CALENO

ZEISS PRO/PRO T

ZEISS CARMET

Computerized tomography measuring machine

ZEISS METROTOM 6 scout

ZEISS Xradia610 & 620 Versa

ZEISS Xradia 800 Ultra

ZEISS Xradia 810 Ultra

ZEISS Xradia Context microCT

ZEISS Xradia 410 Versa

ZEISS Xradia 510 Versa

ZEISS SRE MAXX-ray shielding cabinet

ZEISS METROTOM 800

ZEISS METROTOM 1500

Production process control and inspection procedures

ZEISS VoluMax

ZEISS SurfMax

Online measurement robot

Hybrid measuring station

Offline robot workstation

2D measurement and testing station

Robot guidance

Zeiss Measurement Solutions

Wittmann

Nidec Motors

Henschel

GRASS

Cummins

LT Ultra

SABS

Xiongbang Die Casting

Volkswagen

Bosch

IAC

Agusta Westland

Andrew Tool

Jamco Aeropspace

Three-M Tool

Moventas

Pietro Rosa

PMT India

Rochester Precision Optics

Schwan Cosmetics

Agfa Healthcare

CardioBridge

MeadWestvaco

Braun

starlim//sterner

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content

Product Introduction