Moisture determination is mainly used for the determination of total moisture (and analytical water) in coal, meat, wood, and other materials.

1) Multi functional: This instrument uses a quartz * * carbon heating tube for heating, which is suitable for measuring the moisture content and drying of various solid samples, as well as determining the solid content. This instrument also has an optional program for users to choose their own drying time, drying method, etc.

2) Multiple sample measurements: One host can perform the measurement of 1-20 samples at a time. Each time, the sample can be automatically identified and measured without the need for manual recording.

3) Fast heating: Due to the use of * * carbon tubes as heating elements, this instrument can reach the set temperature in a very short time, effectively shortening the testing time and having a good energy-saving effect.

4) Fast measurement speed: Due to the use of automatic weighing, which is carried out in a closed furnace chamber without manual intervention, the dried sample can be weighed immediately without cooling. The identification, peeling, and weight loss calculation of the sample are all automatically performed by the computer, resulting in a very fast measurement speed.

5) High precision: Pre installed Mettler electronic balance (with a sensitivity of 0.1mg), the entire measurement process is automatically carried out without human error, with high measurement accuracy and good repeatability.

6) Good performance: This instrument was designed with a focus on high performance and high reliability. Adopting a highly integrated modular design and using a central processing unit, the instrument has excellent stability and reliability. If the instrument is used strictly according to the operating method, it is basically maintenance free.

7) Easy to operate: Adopting a fully Chinese operation menu, each operation step has Chinese prompts, which are intuitive and clear, flexible to operate, and as simple as operating an electronic balance.

Main parameters:

1) Power supply: 220V, 50Hz.

2) Rated input power: 2800W

3) Number of samples: 1-20.

4) Single sample weight: 10-12 g (analyzed water is 0.9-1.1 g).

5) Weighing resolution: 0.0001g.

6) Sample particle size: not greater than 6mm (for water analysis, not greater than 0.2mm).