Z1030 Zirconia Oxygen AnalyzerDetect oxygen levels ranging from percentage to small PPM in clean gases. This analyzer is highly suitable for accurate oxygen content detection and is an important part of the original equipment manufacturer (OEM) equipment it produces. Encapsulated in a disk mounted casing, using zirconia oxygen sensors for precise detection to ensure the production of high-quality industrial gases. The unique sensor and heater design results in short preheating time, fast response, and long sensor lifespan.

Z1030 Zirconia Oxygen AnalyzerThe large multi digit digital automatic shift LCD is used to display the detected concentration and user adjustable parameters in configuration mode.

Through a fully bidirectional RS232 interface,Z1030 Zirconia Oxygen AnalyzerCan communicate with most microcontrollers. In addition to digital communication functions, it also has a fully programmable isolated 4-20mA output.

Z1030 Zirconia Oxygen AnalyzerTechnical Parameter

display

Multi bitLCD –character height12.7mm

Display Range

Display Range0.01ppm－100% O2Automatic gear shift display

display resolution

100%－103% 1%

10%－99.0% 0.1%

1%－9.99% 0.01%

0.100 －0.999% 0.001%

100ppm－999ppm 1ppm

10.0ppm－99.9ppm 0.1ppm

0.00ppm－9.99ppm 0.01ppm

Z1030 Zirconia Oxygen Analyzeraccuracy

Reading of±1%perhaps±1mVsensor output－Take the bigger one

stability

Better than full range every month2%

Sample gas flow rate

100 －300 ml/min

response speed

T-90：300ml/minUnder the traffic, it is4Within seconds

Sample gas inlet pressure (without pump installed)

10mbar－8bar

Sample gas temperature

The maximum temperature at the analyzer is100°C

Sampling system material

Stainless steel, platinum, zirconia, nickel plated brass, nylon

Sample gas inlet and outlet connection

Related to the sample gas path: Nickel plated brass (static compression seal, suitable for outer diameter of)6mm/0.25”The pipe)Double clamp brass jointDouble clamp stainless steel joint

Z1030 Zirconia Oxygen AnalyzerAnalog Output–quarantine

4 －20mA –Maximum Load500ohm

The output is programmable, and the full-scale value can be within1ppm - 100%Adjustment, the zero point value can be adjusted within0ppm- 90%Adjust.

serial communication interface

RS232DCE

Z1030 Zirconia Oxygen AnalyzerUsage environment

Temperature:0 －45 °C

Relative humidity:15 －90%Gas does not aggregate

power supply

24V DC +/- 20%, maximum current1ampere

Can be specified at the time of ordering85 - 240 Vac、50/60HzAny voltage supply between them, maximum power consumption24VA.