Product Introduction

YZR-BLZ/T4The working principle of a lightning rod is to generate a faster upstream lead than a regular lightning rod.The strong electric field formed by thunderstorm clouds in the atmosphere is the source of electricity for lightning rods, and the ion generation of lightning rods also utilizes this energy, so there is no need for an external power source. When the charge of thunderclouds accumulates, a huge field strength is generated between the thunderclouds and the earth, which can reach before the formation of lightningKV/M level, YZR-BLZ/T4After the lightning rod is grounded, a strong voltage difference is formed between their voltage and the tip of the main rod, rapidly ionizing the nearby air, forming a corona phenomenon, and generating a large number of charged particles.YZR-BLZ/T4The product is equipped with an ion generator inside, which generates high-voltage pulses and produces a large number of charged ions in the nearby atmosphere. The ions quickly move upward under the action of the lightning field, and the insulation distance between the lightning cloud and the lightning rod is shortened. Therefore, compared to other objects located within the lightning rod protection zone, the lightning rod will release upward leading charges in advance. This leading charge then combines with the downward leading charge, and the lightning rod becomes the best trigger point for lightning.

Product Structure:

The active lightning rod is made of stainless steel material and consists of a central collection rod, a emitter, a triggering device, an exciter, and an exciter fixing plate. The exciter is insulated from the reflector and the central collection rod, and the reflector and the central collection rod have good electrical connection with the ground. The exciter base is made of synthetic resin and is suitable for any corrosive environment.

Product Features:

1. Non electronic, long-life, no electronic system will not be damaged by surge impact;

2. Selection of models with different protection radii;

3.100% discharge rate, high protection level;

4. Fully active interception lightning system;

5. Able to ensure electrical continuity and functional continuity after repeated lightning strikes and discharges;

When there is lightning, it will activate itself;

7. It has early discharge function;

8. Beautiful appearance, safe and reliable, no maintenance required;

9. The quality of protection will not change after lightning strikes

Technical Specifications:

What are the precautions for installing lightning rods:

(1) When selecting the installation location of an independent lightning rod, the distance between the lightning rod and its grounding device and the distribution device should be maintained as follows: on the ground, the spatial distance from the independent lightning rod to the conductive part of the distribution device and to the grounding part of the electrical equipment and structure of the substation should not be less than 5 meters; underground, the distance between the grounding device of the independent lightning rod itself and the substation grounding grid should generally not be less than 3 meters; the distance between the independent lightning rod and its grounding device and the entrance and exit of roads or buildings should be greater than 3 meters.

(2) The grounding resistance of an independent lightning rod should generally not exceed 10 fl.

(3) In order to prevent lightning waves from entering the room through wires and endangering personal safety when lightning strikes the lightning rod, it is not allowed to install low-voltage lines or communication lines on the lightning rod structure. The power supply line for lighting fixtures on structures equipped with lightning rods must use cables with metal protective layers buried directly underground or wires that pass through metal pipes. The cable protection layer or metal tube must be grounded, and the buried length should be at least 10 meters before it can be connected to the grounding grid of the distribution equipment, or to the power line or low-voltage distribution equipment.

(4) A metal cylinder (such as a chimney) equipped with a lightning rod can be used as the down conductor of the lightning rod when its thickness is greater than 4 mm. The bottom of the cylinder should have two symmetrical connections to the grounding body.

Installation Instructions：During installationThe YZRN brand lightning rod must strictly comply with the mandatory provisions of the national standard "Code for Design of Lightning Protection of Buildings" GB50057-2010：1. Determine the lightning protection category of the building based on the area, height, number of mine days, geographic environment correction factor, and building usage characteristics of the protected building.2. Determine the protection radius of the lightning rod based on the type of lightning protection and the installation height of the lightning rod.3. The down conductor should be electrically connected to the main steel reinforcement of the building, or two or more down conductors should be made according to regulations; The down conductor should be equipped with a disconnect card and insulation protection should be provided on the nearby ground.4、The grounding body and grounding resistance should be in accordance with the "Code for Design of Lightning Protection of Buildings"GB50057-2010 requirementsholdline.