Dimensions 1180 * 1660 * 1820 (depth * width * height mm)
Studio size: 1000 * 1000 * 1100 (depth * width * height mm)
Studio material: SUS304 stainless steel
Studio configuration: One stainless steel flatbed trolley
Outer wall material: A3 steel plate, surface rust removal and painting treatment
Working temperature range: room temperature RT~250 ℃, adjustable freely
Temperature control accuracy: ± 1 ℃
Temperature uniformity: ± 3 ℃%
Temperature control method: LED/intelligent/dual digital display/microcomputer controller, equipped with PV/SV dual digital display window+SSR solid-state relay * 1 set, temperature sensor adopts K TYPE, and is automatically interlocked with electric heater for control
Optional: Explosion proof integrated control cabinet for electrical control box, including electrical components. Special explosion-proof 750W high-temperature resistant motor for circulating fan
Power supply voltage: 380V0HZ
Circulation method: After being heated, the air in this equipment is blown into the air outlets on both sides of the air duct by a centrifugal circulation fan, and horizontally flows out. It enters the working room and conducts heat with the baked workpiece for sufficient heat exchange before being sucked into the top air duct. Cycle again. Create a forced convection wind cycle to raise the temperature in the studio. The structure of this device and the principle of hot air circulation ensure temperature uniformity in various areas inside the oven, eliminating low temperature blind spots and hot air blind spots
Heating equipment: SHEATHED HEATER stainless steel explosion-proof tubular electric heating generator is used, with a heating element power of 12KW. Divide into one group to control heating. The continuous service life of the heating element can reach over 30000 hours. The characteristics of efficient anti-corrosion and long service life, independent system, do not affect the control circuit
Sealing: Equipped with silicone door strips, it effectively prevents heat loss, maintains stable temperature, and has good energy-saving effect.
Insulation layer: Each part is designed with a thickness of 100mm based on the temperature rise outside the furnace and energy saving considerations. The filling material is 100K grade high-density aluminum silicate fiber, which can withstand high temperatures of 850 ℃ and has a thermal conductivity of 0.0048 ∧ m/℃
Box surface temperature rise: According to JB5220-91 industry standards, for drying boxes with a working temperature not exceeding 200 ℃, the surface temperature should not exceed room temperature plus 25 ℃
Testing standard: Temperature measurement points can be placed for testing according to JJF1101-2003 "Temperature and Temperature Calibration Specification for Environmental Testing Equipment" or the national industry standard JB/T5520-91 "Technical Conditions for Drying Oven".
Timer device: Within the range of 0-99h (m), the timer starts when the temperature inside the furnace reaches the set point. When the baking time reaches the set time, the heating system will automatically shut down with a timer beep alarm. The working time can be set according to actual needs, and the electric heater will automatically stop
Other specifications: Various sizes and functions of ovens (ovens/drying ovens) can be customized according to the actual needs of users