organic heat carrierIncluding: heat transfer fluid, heat transfer oil, organic heat transfer medium, all organic media used for indirect heat transfer purposes, classified into synthetic organic heat carriers and mineral oil-based organic heat carriers according to their chemical composition; According to the boiling range, it can be classified into chlorine phase organic heat carriers and liquid phase organic heat carriers.

Organic heat carrierConradson carbon residueThe measuring instrument YT-268 is in accordance with the standards of the People's Republic of ChinaGB/T 268The method for determining residual carbon in petroleum products (Conradson method) is designed and manufactured to determine the amount of residual carbon left after evaporation and pyrolysis of petroleum products according to the methods specified in this standard, in order to provide an indicator of the relative coking tendency of petroleum products.

1、 Characteristics of YT-268 Organic Thermal Carrier Kang's Residual Carbon Analyzer
1. The YT-268 Kang's residual carbon analyzer is designed and produced according to the GB/T268 standard.
2. The structure is simple and fully equipped, and can be used with only household gas (or other civilian gas).

2、 Organic heat carrier Kang's residual carbon analyzer YT-268 index
1. Ceramic crucible: short, with a capacity of approximately 30 milliliters.
2. Inner iron crucible: made of iron sheet, with a capacity of 75 ± 5 milliliters, and coated with black on the surface.
3. Outer iron crucible: made of iron sheet, with a capacity of 190 ± 10 milliliters, covered, and coated with black on the surface.
4. Tripod: Made of iron, polished with nickel chromium plating on the surface, with a height of 250 ± 10 milliliters and a ring diameter of Ø 130 ± 5 millimeters.
5. Flame blocking body: made of 0.6-0.8mm thick iron sheet, with a diameter of 90 ± 2mm for the upper opening and 82 ± 2mm for the lower opening, and equipped with asbestos pressure ring inside. Another special type of trace flame body has three curved legs inside the hole, which can be used to directly support the crucible.
6. Round iron cover: The material is made of 0.8mm thick iron sheet, with a lower height of 50-53mm and a middle cone height of 25 ± 2mm. At the top of the upper circular tube, there is a fire bridge welded with a mouth shape made of Ø 3 iron wire, with a height of 50 ± 3mm, used as a height indicator for flames and coated with black on the surface.
7. Spray lamp: using meter format gas spray lamp.

Shanghai Yutong Instrument Factory www.ytmy17.com http://www.shytyq.com/