purpose

This machine mainly tests the compressive strength of packaging boxes, as well as the compressive strength and stacking strength of cardboard boxes. By analyzing the test results, the characteristics of cardboard boxes and color boxes and whether the packaging structure design meets the strength requirements for transportation and handling can be determined. This machine can display the force, displacement, and time curves during testing on the computer, and can test the stress condition of packaging boxes during compression. The results of the experiment can serve as an important reference for the height of finished product packaging boxes stacked in the factory.

Specification parameters

Test space: 1000mm * 1000mm * 1000mm;

Capacity selection: MXA2000KG;

Control mode: Full computer control mode, powerful software functions

Force units: N, kN, gf, kgf, lbf, kP, tf (SI), tf (long), etc

Length units: mm, cm, Inch, m, km, um, etc

Stress units: Pa, Kpa, Mpa, Gpa, KN/㎡, N/㎡, etc

Power resolution: 1/1000000

Sensor accuracy: 0.03%;

Machine accuracy: better than level 0.5

Travel resolution: 1/1000000mm

Collection rate: up to 1200 times per second

Speed range: 0.001~1000mm/min

Test space: Ø 140mm

Shutdown mode: overload shutdown, emergency stop button, automatic shutdown due to specimen damage, automatic shutdown with upper and lower limit settings

Machine power: driven by servo motor

Machine size (mm) (W × D × H): approximately 160 × 100 × 180cm

Net weight of the machine: approximately 1500KG

Power: 400W

Power supply: 220V 50~60HZ

software function

The data extraction frequency can be set up to 2, 5, 10, 25, 50, 100, 400 to 1200 Hz

◎ Operation method: Testing can be controlled by keyboard and mouse, and the fixture position can also be adjusted by the machine's quick up and down keys

◎ Homework Platform: Windows 7/8/10 operating system

◎ Display in Chinese, English, Japanese, Korean, Spanish, Poland, Portuguese, and German

◎ Operation mode: TCP/IP interface bidirectional transmission, can directly control machine actions on a single machine or computer

◎ Multiple test data can be imported and displayed simultaneously

Unit selection can vary in both metric and imperial systems

◎ Table flexibility, allowing for self planning and analysis of data

The name of the data can be set by oneself, and the calculation formula can be customized

The test screen can choose to display data, graphics, or both simultaneously

◎ Data processing: capable of storing, importing, listing, statistical comparison, etc

Adjustment of physical quantities on the X-Y axis of the curve chart, marking of specific points, intervals, slopes, etc. on the curve

◎ Can test tensile, compressive, bending, peeling, spring, creep and other tests

◎ Software protection: Over travel, over capacity protection, over time shutdown

Diversified testing actions, including custom testing, creep testing, holding (pressing), testing pause, deformation switching, foam testing, etc

Modular test piece setting, providing convenient and easy test piece setting

Modular testing conditions reduce human errors and oversights in setting

Key data extraction, with customizable upper and lower limits for testing data specifications

Supports multiple sets of I/O signals and adds testing mechanisms

◎ Communication interface: TCP/IP RJ45 connection cable

◎ Calibration settings: Provides calibration parameter settings, can use multiple sensors with different capacities, and does not require recalibration when replacing sensors.