YL-1500-1The liquid filling machine is suitable for:

Flammable and explosive materials: liquid materials such as acetone, tetrahydrofuran, butanediol, aniline, nitro benzene, methane chloride, methyl ethyl ketone peroxide, etc;

Corrosion prone materials: liquid materials such as ethanolamine, epichlorohydrin, hydrogen peroxide, phosphoric acid, formic acid, sulfuric acid, etc;

Strong condensation crystallization type: polyetherMDIPhenol, liquid materials such as phenol and liquefied wax;

High viscosity category: Resin, polyurethanePULiquid materials such as glue, paint, coatings, white latex, asphalt, grease, etc.

Features:

1. Manual/automatic selectable 11Automatically determine the tare weight range and peel, solving the problem of different container weights affecting accuracy

2. Using imported weighing componentsinfluence

3. Shortcut key parameter settings 12 The contact part with the material is made of 316 stainless steel, while others are made of 304 stainless steel or carbon steel

4. Up to 10 sets of formula data can be stored. The gun plug is made of polytetrafluoroethylene anti-corrosion material

5. Two speed feeding, fast/slow, with adjustable feeding speed Automatically count the number of filling barrels and the total weight of filling

6. Anti collision bucket setting, when the filling gun collides with the top of the container during descent, it automatically lifts the filling gun 14 Explosion proof configuration can be used in hazardous areas (optional)

7. Automatic adjustment of advance quantity to make the next bucket closer to the set value Automatic lid loosening/tightening machine (optional)

8. The gun filling part adopts a linear guide rail, making it easier and faster to move. 16 Thermal insulation heating device (optional)

9. Unique locking device reduces errors caused by shaking during filling. 17 Standard reserved RS232/485 interface, optional DP and MUDBUS bus,

10. Weighing out of tolerance alarm and fault self diagnosis facilitate computer data management

Application:

The YL-1500-1 weighing liquid filling line can be used in conjunction with marking machines, coding machines, labeling machines, capping machines, conveyors, and other supporting equipment to form automatic and semi-automatic filling production lines according to different material and process requirements.

System Composition:

The filling line mainly consists of a filling gun moving mechanism (linear guide rail, locking device, rodless cylinder), a feeding spray gun, a suction hood, a liquid cup, a system control cabinet (including weighing instruments, electrical components, touch screen, operation buttons, PLC, explosion-proof solenoid valve, explosion-proof photoelectric switch), a scale platform (including weighing sensors), explosion-proof motor, stainless steel power roller, stainless steel and carbon steel frame, etc.

Technical reference:

Specification YL-1500-1

Filling container 100-1500kg

Filling speed 200L iron drum 45-55 barrels/hour IBC drum 12-20 barrels

Filling accuracy level 0.2,+0.1-0.2%

The maximum weight of the weighing device is 1500kg, with a division value of 100g/200g/500g

Filling containers such as square/round drums, iron drums/plastic drums/pallets, IBCs, etc

Working temperature -10 ℃~45 ℃

Relative humidity<95%

Working power supply AC380V/AC220V, 50HZ,<1.0kW

Installation requires horizontal fixation on concrete floor (concrete thickness greater than 20mm)

Working gas source 0.4~0.6Mpa

Gas consumption 10m ³/h

Material interface DN40 standard flange, material inlet pressure: less than 0.6Mpa