VIP member
YD60 magneto electric speed sensor
The YD60 magneto electric speed sensor is a traditional structure that uses the principle of cutting magnetic field lines, and its simple and durable
Product details
YD60Magnetic electric speed sensors can convert angular displacement into electrical signals for counters to count. As long as they are non-contact, they can measure the speed and linear velocity of various magnetic materials such as gears, impellers, and disks with holes (or grooves, screws).
Sensors have the advantages of small size, sturdy and reliable, long service life, and no need for power or lubricating oil, and can be used with general secondary instruments.
● Output waveform: approximate sine wave (≥)50r/min）
● Output signal amplitude:50r/minTime ≥300MvSignal amplitude size;
The gap between the sensor core and the measured gear tooth tip:δ＝0.5～1.5mm ;Tested gear modulem = 2 ;gearZ = 60;material:electrical steel;The amplitude of the signal is proportional to the rotational speed and inversely proportional to the gap between the iron core and the tooth tip
● Working temperature:-50～+120℃，-50～+200℃ (specially customized)
● Output format:X12K4PFour core plug or direct lead
● Frequency response:>30Hz
● Protection level:IP68
● Weight: Approximately120g(Excluding output wires)
● Usage time: Continuous use
● Vibration resistance performance: vibration（10Hz~2KHz）30g, impact100g
● Insulation strength:1000V 50Hz，1min(Channel and shell)
● Shell material: stainless steel304(Other materials can be used according to user requirements)
● dimension
Figure 1 dimension
1、 Installation instructions
picture1 Various installation speed measurement diagrams
Speed sensor product testing video：
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-