Product Introduction

Q-SUN Xe-1Characteristics of Xenon Lamp Aging Test Chamber

Full spectrum xenon lamp tube

Xenon arc lamps accurately reproduce the full spectrum of natural sunlight.Q-LabThe lamp tube is air-cooled(Not water-cooled type)This makes it more economical, efficient, and easy to maintain. The lifespan of the lamp tube is1500Hours, per unitXe-3use3Root light tube.

optical filter

Choosing a filter can simulate various environments, including direct sunlight and sunlight transmitted through glass windows.Q-LabThe performance of the filter will not decrease with increasing usage time,Therefore, there is no need to replace the filter during normal operation,The only exception isWindow-IRThe filter needs to be replaced regularly. All modelsQ-SUN Xe-1Each unit uses a filter.

Temperature monitoring and control

Temperature control is very important because it affects the aging rate.Q-SUN Xe-1The test box uses a blackboard temperature sensor to accurately control the sample exposure temperature. Whether the sensor is insulated, the irradiation intensity, the type of filter, the usage time of the lamp tube, and the ambient temperature can be35℃and103℃between. Blackboard temperature control isXe-1The standard configuration of the test box can also be configured with an air temperature sensor inside the box to control the air temperature. SeeLX-5000 - Q-SUN Xe-1andXe-3Handbook.

Vertical installation sample

Xe-1The flat sample mounting tray of the xenon lamp aging test chamber can accommodate specimens of different shapes and sizes, including three-dimensional parts. There are also various sample holders available for use.Xe-1The size of the installation tray is251mm x 457mmInstall as many as possible15a51mm x 102mmSamples of different sizes.

SOLAR EYESuneye irradiance control

SOLAR EYEThe solar eye irradiance control system can continuously monitor and control the output of light intensity,This ensures precise exposure and reproducible test results. The irradiance control point can be selected at340nmThe420nmorTUV (completeUV)SeeLX-5000

- Q-SUN Xe-1andXe-3Handbook.

Water spray option(modelXe-1-STheXe-1-SC)

Xe-1The tester simulates outdoor humid erosion through the option of pure water spray. Two nozzles are located at the top of the test chamber. Spraying can be set to occur in a cycle of darkness or light. Please note, those with water sprayXe-1The normal operation requires purified water. SeeLX-5000 - Q-SUN Xe-1&andXe-3Handbook.

Refrigerator options for low temperature conditions(modelXe-1-BCandXe-1-SC)

Some indoor products, such as drugs and cosmetics, must be exposed to low temperatures to prevent non self harm-ageing. When testing these thermal sensitive materials, one can use a refrigeratorXe-1Testers that meet the requirements for low temperatures. SeeLX-5000 - Q-SUN Xe-1&andXe-3Handbook. Due to the presence of a refrigeration unit, it depends on the type of sensor, radiation level, filter type, lamp lifespan, and ambient temperatureQ-SUN Xe-1Xenon lamp aging test chamber19℃-103℃The temperature range can operate.Xe-1The refrigeration unit provided is a permanent configuration for small testers.

Applicable standard(part)

including: ASTM，ISO，DIN，SAE，BS，ANSIandAATCCWait. For detailed information, please refer to the technical manualLX-5054.

Technical Specifications