working principle
The hot air enters the bottom of the dryer through a tangent line and forms a strong rotating wind field driven by the agitator. The paste like material is fed into the dryer by a spiral feeder, and under the strong action of high-speed rotating stirring blades, the material is dispersed by impact, friction, and shear forces. The block like material is quickly crushed, fully contacted with hot air, heated, and dried. The dehydrated dry material rises with the hot air flow, and the classification ring intercepts large particles. Small particles are discharged from the center of the ring outside the dryer and are recovered by the cyclone separator and dust collector. Undried or large materials are thrown towards the wall by centrifugal force and fall back to the bottom for crushing and drying.
Performance characteristics
The organic combination of swirl, fluidization, jetting, and crushing classification technologies.
Compact equipment, small size, high production efficiency, continuous production, achieving "small equipment, large production".
High drying intensity, low energy consumption, and high thermal efficiency.
The material has a short residence time, good product quality, and can be used for drying heat sensitive materials.
◎ Negative pressure or micro negative pressure operation, good sealing, high efficiency, and elimination of environmental pollution.
Adapt to materials
Organic compounds: atrazine (pesticide insecticide), lauric acid, benzoic acid, benzoic acid, fungicide
Sodium oxalate, cellulose acetate, organic pigments, etc.
Dyes: anthraquinone, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various dyes
Nitrogen dye intermediate.
Inorganic substances: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide
Various metal hydroxides, heavy metal salts, synthetic cryolite, etc.
Food: soy protein, gelatinous starch, wine trough, wheat sugar, wheat starch, etc.

technical specifications

model	XSG-2	XSG-4	XSG-6	XSG-8	XSG-10	XSG-12	XSG-16	XSG-20
Host inner diameter mm	200	400	600	800	1000	1200	1600	2000
Air volume M3/h	350 -500	1150 -2000	2450 -4500	4450 -7550	7000 -12500	10000 -20000	18000 -36000	28200 -56500
Evaporated moisture kg/h	12 -17	40 -70	80 -150	150 -250	230 -4250	300 -600	600 -1000	1000 -1500
^Large installed capacity kw	10	20	40	65	85	105	150	230
^Large height m	4.0	4.8	5.8	6.5	7.1	7.8	8.8	10.1
Floor area m2	15	20	28	35	40	52	80	150

Note: 1. The water evaporation rate is based on an inlet air temperature of 180 degrees Celsius^oC， The outlet air temperature is 80^oThe water evaporated per hour at C,
2. In addition to the above models, special designs can be made for users,
3. The above installed capacity is standard matching, and can be significantly reduced according to different power matching of materials.
Processing materials and characteristics (based on Type 6 flash evaporation)

Material name	stearic acid	Aluminum hydroxide	Zinc carbonate	monosultap	TMTD	DSD acid	Iron oxide red	Antimony dioxide	Cuprous chloride	White too black
Inlet air temperatureoC	150	180	150	120	140	150	200	180	200	280
Initial moisture content%	80	55	80	30	65	60	60	45	30	85
Final moisture content%	0.5	1.5	1.0	1.0	0.5	0.5	0.5	1.0	3.0	5.0
Actual drying capacity kg/h	140 -160	250 -280	130 -170	80 -110	80 -120	80 -120	300 -350	280 -320	290 -310	250 -300

Material name	accelerator	Oil soluble ink	Manganese zinc substituted acid	Phthalic orchid	Calcium citrate	Ultra fine calcium carbonate	Mud treatment agent	Sodium Dioxoisocyanurate	Sodium trimethoxyisocyanurate
Inlet air temperatureoC	150	150	120	150	140	160	200	180	150
Initial moisture content%	60	45	30	55	40	70	75	25	30
Final moisture content%	0.5	2.0	1.0	1.0	1.0	1.5	5.0	0.2-2	1.0
Actual drying capacity kg/h	80 -110	350 -380	120 -150	160 -180	300 -350	430 -470	290 -310	80 -120	90 -150