VIP member
XR80J series universal sputtering thin film pressure transmitter
Brief introduction: The XR80J series universal sputtering thin film pressure transmitter has undergone precise temperature compensation, all stainless
Product details
Brief introduction:
The XR80J series universal sputtering thin film pressure transmitter is characterized by high precision, high anti-interference, strong overload and impact resistance, good moisture resistance, and long-term stability through precise temperature compensation, all stainless steel sealed welding structure, and perfect assembly process. The XR80J series universal sputtering thin film pressure transmitter is equipped with multiple media interfaces for customers to choose from, which can measure the absolute pressure, gauge pressure, and differential pressure of gases and liquids. It is widely used in automatic control fields such as metallurgy, aviation, aerospace, petrochemicals, etc
Details introduction:
XR80J series universal sputtering thin film pressure transmitter
Characteristics of XR80J series universal sputtering thin film pressure transmitter
*Using sputtered thin film pressure sensitive components*Contact with liquid components using17-4PHMade of stainless steel
*Applicable * High125℃The medium and ambient temperature*Various types of pressure and electrical connections
*All standard output signals:0-5V；0.5-4.5V；1-5V；**High100V/mofEMCProtection capability
0-10V；4-20mAreach10-90℅Ratio voltage*Dual output sensor
Technical parameters of XR80J series universal sputtering thin film pressure transmitter:
1. XR80J series universal sputtering thin film pressure transmitterperformance
|
Range（bar） |
5-2200 |
|
|
Allow overvoltage |
2Double Full Scale |
After removing the overpressure pressure, all performance remains unchanged (destructive pressure)10Multiple Full Scale Pressure |
|
Accuracy (including nonlinearity, hysteresis, and repeatability) |
0.1﹪FS;0.2﹪FS;0.5﹪FS;optional |
|
|
offset thermal drift |
less than0.01﹪FS/℃ |
|
|
Thermal drift |
less than0.01﹪FS/℃ |
|
|
response time |
greater than0.5ms |
|
|
durability |
＞107Secondary full pressure cycle |
|
2. XR80J series universal sputtering thin film pressure transmitterElectrical Rules
|
Nominal output signal |
4-20mA(Two lines) |
0-5V,0.5-4.5V,1-5V |
0-10V |
10-90℅ratio |
|
Supply Voltage |
8-36V |
8-36V |
12-36V |
5V±0.5V |
|
Output Impedance |
- |
less than90 |
less than90 |
less than90 |
|
load |
0-1000 |
greater than10K |
greater than10K |
greater than5K |
3. XR80J series universal sputtering thin film pressure transmitterenvironmental condition
|
Medium temperature range |
-40～125℃ |
|
Temperature range |
Refer to section25page |
|
Compensed Temperature Range |
-40～125℃ |
|
Transportation temperature range |
-40～125℃ |
|
Magnetic field influence |
Strength in400A/mthe following50HZAC or DC magnetic field acting on any axis of the transmitter The output error caused by it can be ignored. |
|
RFIeffect |
The frequency is10KHZ~100MHZThe strength is30V/m(unshielded cable)10V/m）The following RF interference, acting on any axis of the transmitter, causes an output error smaller than the calibrated range+0.1% |
|
vibration effect |
Vibration frequency20~2000HZ, amplitude2mmAcceleration6g,existx,y,zIn any axial direction, every Towards vibration3minZero point output changes to * large range+0.1% |
|
protection grade |
Refer to section25Page (related to the selected electrical connection components) |
4. XR80J series universal sputtering thin film pressure transmittermechanical condition
|
material |
Contact with liquid components |
17-4PH |
|
degrees of protection provided by enclosure |
1Cr18Ni19TiOr plastic |
|
|
Pressure connection |
17-4PH |
|
|
Electrical connection |
Refer to section25page |
5. XR80J series universal sputtering thin film pressure transmittersize/combination
|
Electrical connection drawings |
M12*1 |
Hessman connector |
||
|
|
|
|||
|
Pressure connection drawing |
M20*1.5 |
G1/4 |
M12*1.5 |
G1/4EDseal |
|
|
|
|
|
|
*If you need any other requirements, please negotiate with the company.
*Please refer to the selection40Page ordering selection table.
*Example diagram of size combination:
M12*1Electrical connections andG1/4 pressure connection combination size diagram
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-