VIP member
XH7136 CNC milling machine
XH7136 CNC milling machine has high-precision pitch compensation, and high-precision laser measuring instruments are used to compensate for each trans
Product details
Technical parameters of XH7136 CNC milling machine:
1、 All are made of resin sand wear-resistant castings, with strong and tough ribs, oversized columns, wide and low seats, and honeycomb structure. After two annealing treatments and vibration aging, the stress is removed to ensure long-term non deformation.
2、 The three-axis adopts highly rigid rectangular guide rails, which can withstand heavy cutting and worktable grinding. All non sliding surfaces of the guide rails have undergone high-frequency quenching treatment, greatly enhancing surface hardness; The use of imported guide rail soft tape embedded in the sliding surface of the guide rail greatly increases the wear resistance of the guide rail and improves the service life of the machine tool.
3、 The three-axis transmission adopts high rigidity ball screw pairs and is equipped with high-precision ball screw bearings from Japan's NSK, ensuring positioning accuracy and repeatability.
4、 All three axes are equipped with domestically produced servo motors and spindle motors, providing strong power and ensuring feed accuracy under strong load-bearing capacity.
5、 All three shafts are directly connected, and couplings are used to ensure the transmission bearing capacity of each shaft.
6、 Adopting the internationally renowned Taiwanese brand's P3 level high rigidity and spindle ensures the advantages of high reliability, long lifespan, low noise, minimal vibration, and high precision of the spindle.
7、 Each axis is equipped with a sealed machine tool guide rail protective cover, which effectively protects the guide rail and screw, extending their service life.
8、 Adopting KND numerical control system and matching servo motor and drive, it ensures the high stability, fast speed, smooth surface, and high accuracy of the control system.
9、 Dual automatic lubrication system: The guide rail lubrication adopts a volumetric distributor combined with oil injection to quantitatively supply the required oil for the guide rail, reducing the waste of lubricating oil and avoiding environmental pollution.
10、 The wiring inside the electrical cabinet complies with national electrical safety regulations, ensuring that the control system operates without external interference. By using a heat exchanger, the hot air inside the electrical box is quickly discharged, maintaining a constant temperature inside the box and enabling the control system to operate stably for a long time.
| Project | unit | Technical Parameter |
| X-axis stroke | mm | 900 |
| Travel Y-axis | mm | 350 |
| Z-axis travel | mm | 500 |
| Distance from spindle end face to worktable | mm | 100-600 |
| Distance from spindle center to column guide surface | mm | 460 |
| Quick movement (X/Y/Z) | mm/min | 5000/5000/4000 |
| feed rate | mm/min | 1-2000 |
| Workbench size | mm | 1250×360 |
| Work with a large load-bearing capacity | kg | 400 |
| Number/width/spacing of T-shaped slots on the workbench | 3/18/80 | |
| Range of spindle speed | r/min | 8000/stepless |
| Spindle motor power | kW | 5.5 |
| Spindle hole taper | BT40 | |
| positioning accuracy | mm | 0.01 |
| repeatability | mm | 0.02 |
| Net weight of machine tool | kg | 2400 |
| External dimensions | mm | 2220×1850×2350 |
1、 All are made of resin sand wear-resistant castings, with strong and tough ribs, oversized columns, wide and low seats, and honeycomb structure. After two annealing treatments and vibration aging, the stress is removed to ensure long-term non deformation.
2、 The three-axis adopts highly rigid rectangular guide rails, which can withstand heavy cutting and worktable grinding. All non sliding surfaces of the guide rails have undergone high-frequency quenching treatment, greatly enhancing surface hardness; The use of imported guide rail soft tape embedded in the sliding surface of the guide rail greatly increases the wear resistance of the guide rail and improves the service life of the machine tool.
3、 The three-axis transmission adopts high rigidity ball screw pairs and is equipped with high-precision ball screw bearings from Japan's NSK, ensuring positioning accuracy and repeatability.
4、 All three axes are equipped with domestically produced servo motors and spindle motors, providing strong power and ensuring feed accuracy under strong load-bearing capacity.
5、 All three shafts are directly connected, and couplings are used to ensure the transmission bearing capacity of each shaft.
6、 Adopting the internationally renowned Taiwanese brand's P3 level high rigidity and spindle ensures the advantages of high reliability, long lifespan, low noise, minimal vibration, and high precision of the spindle.
7、 Each axis is equipped with a sealed machine tool guide rail protective cover, which effectively protects the guide rail and screw, extending their service life.
8、 Adopting KND numerical control system and matching servo motor and drive, it ensures the high stability, fast speed, smooth surface, and high accuracy of the control system.
9、 Dual automatic lubrication system: The guide rail lubrication adopts a volumetric distributor combined with oil injection to quantitatively supply the required oil for the guide rail, reducing the waste of lubricating oil and avoiding environmental pollution.
10、 The wiring inside the electrical cabinet complies with national electrical safety regulations, ensuring that the control system operates without external interference. By using a heat exchanger, the hot air inside the electrical box is quickly discharged, maintaining a constant temperature inside the box and enabling the control system to operate stably for a long time.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-