XD1400 horizontal end face milling machine is widely used in large-scale machining equipment and heavy machinery industry. End face milling machines have the advantages of sturdy structure, good rigidity, superior flexibility, milling of end planes and grooves for large and ultra large workpieces, end face processing for large workpieces and steel components, and large steel and iron castings.

End face milling machine is a machine tool that mainly uses milling cutters to machine various surfaces on workpieces. Usually, the rotation of the milling cutter is the main motion, and the movement of the workpiece (and) milling cutter is the feed motion. It can process flat surfaces, grooves, as well as various curved surfaces, gears, etc.

Operating rules for horizontal end face milling machine

1. It is strictly prohibited for the operator of the end face horizontal milling machine to overload the equipment.

2. Before driving, carefully inspect according to the patrol inspection points and lubricate according to the lubrication chart.

3. When parking for more than eight hours before starting the equipment, it should be turned at low speed for three to five minutes to confirm that the lubrication system is unobstructed and all parts are moving normally before starting work.

4. Do not leave or entrust others to take care of it during use, do not dismantle protective devices, and do not dismantle the gear shift iron.

5. Before moving the crossbeam spindle worktable and lifting platform, the fastening screws should be loosened, the surrounding debris should be cleaned, the guide rails should be wiped clean, and oil should be applied.

6. When feeding quickly or automatically, the limit iron should be adjusted first.

7. Regularly check the operation and lubrication of equipment and various parts during work. If the operation or lubrication is poor, it should be stopped from use.

8. The worktable of the end face horizontal milling machine is prohibited from placing workers, jamming measuring tools, and workpieces.

9. Before adjusting the automatic cycle, check the correctness of the machine tool's automatic cycle before driving.

10. After completing the work, place each handle in the non working position, place the workbench in the middle position, lower the lifting platform and cut off the power supply.