VIP member
Product details
There is a WeChat QR code below the homepage of the official website. Adding a QR code allows you to watch device videos
Wheel bucket stone washing machine
Wheel bucket diameter:2600mm-4500mm
[Processing ability]:30-250t/h
[Scope of Application]:This machine is widely used for material washing in industries such as sand and gravel fields, mining, building materials, transportation, chemical industry, water conservancy and hydropower, concrete mixing plants, etc.
[Product Introduction]:The wheel bucket stone washing machine is an efficient sand washing equipment developed based on the actual situation of the domestic sand and gravel equipment industry. It has the characteristics of high cleanliness, reasonable structure, large output, and less sand loss during the sand and gravel washing process.
Introduction to Wheel Bucket Stone Washing Machine:
The wheel bucket stone washing machine, also known as the water wheel stone washing machine, adopts advanced technology and is an efficient stone washing equipment developed based on the actual situation of the domestic sand and gravel industry. It has fewer vulnerable parts, a reasonable structure, a large output, and less sand loss during the sand washing process. Especially, its transmission part is isolated from water and sand, so its failure rate is much lower than that of commonly used stone washing machines. It is the choice for upgrading and replacing the domestic stone washing industry.
Performance characteristics of wheel bucket stone washing machine:
The wheel bucket stone washing machine has significant characteristics such as simple structure, smooth operation, clean sand washing, and high output. It is widely used in construction sites, sand and gravel yards, glass factories, power stations, concrete precast stone, and electrical and ground departments
1. The structure of the machine is simple, and the impeller drive bearing device is isolated from water and water receiving materials, greatly avoiding the occurrence of bearing damage caused by immersion in water, sand, and pollutants.
2. Compared with traditional spiral sand washing machines, there are obvious advantages when used for sand and gravel field sand washing, as follows:
a. The loss of medium fine sand and stone powder is minimal, and the gradation and fineness modulus of the washed construction sand meet the national standards of "Construction Sand" and "Construction Pebble and Crushed Stone".
b. This machine has almost no vulnerable parts except for the sieve.
c. Long service life, no need for maintenance for a long time.
Working principle of wheel bucket stone washing machine:
During operation, the motor drives the impeller to slowly rotate through a V-belt, reducer, and gear reduction. The sand and gravel enter the washing tank through a feeding groove and roll under the drive of the impeller, grinding each other to remove impurities covering the surface of the sand and gravel. At the same time, the water vapor layer covering the sand particles is destroyed to facilitate dehydration; At the same time, water is added to form a strong water flow, which promptly carries away impurities and foreign objects with low specific gravity, and discharges them from the overflow outlet washing tank to complete the cleaning process. Clean sand and gravel are carried away by the blades, and finally the sand and gravel are poured into the discharge chute from the rotating impeller, completing the cleaning function of the sand and gravel.
Technical parameters of wheel bucket stone washing machine:
| model | XS2600 | XS2800 | XS3000 | XS3200 | XS3600 | XS4500 |
| Wheel bucket diameter (mm) | 2600 | 2800 | 3000 | 3200 | 3600 | 4500 |
| Speed (r | 2.5 | 1.8 | 1.7 | 1.44 | 1.21 | 1 |
| ******Feed particle size (mm) | ≦10 | ≦10 | ≦10 | ≦10 | ≦10 | ≦10 |
| Processing capacity (t/h) | 30-60 | 50-70 | 70-100 | 80-120 | 120-180 | 180-250 |
| Motor power (kw) | 5.5 | 5.5 | 7.5 | 11 | 15 | 22 |
|
Dimensions (mm) (Long) （wide） （tall） |
3200 2270 2672 |
3700 2500 2990 |
3900 2700 2990 |
3965 3150 3300 |
4355 3400 3700 |
5155 3750 4600 |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-