Walk in high and low temperature wet heat test chamber

1、 Product Name: Walk in high and low temperature wet heat test chamber

2、 Product Model: DB-TH-S-100D

IIITechnical parameters:

1.Studio size (H * W * D) mm: 1000 * 1000 * 1000

2.Temperature regulation method: BTHC method (balanced temperature and humidity regulation method)

3.Working environment temperature:+5~+35 degrees Celsius

4.Volume (L): 1000

5.Temperature range: -70 to+150 degrees;

6.Humidity range: 20%~98% RH

7.Temperature fluctuation: ± 0.5 degrees

8.Humidity fluctuation: ± 1% RH

9.Humidity uniformity: ± 2 degrees

10.Heating time: -70~+20 degrees, less than 40 minutes

11.Cooling time:+20~-70 degrees, less than 100 minutes;

4、 Product preparation of high and low temperature wet heat alternating test chamber:

1.Heater: Nickel chromium alloy electric wire heater

2.Humidifier: Shallow slot heating humidifier

3.Blower: Centrifugal fan

4.Temperature (humidity) sensor: PT100 dry wet bulb sensor

5.Inner box material: mirror stainless steel plate (304);

6.Outer box material: matte stainless steel plate (304)

7.Insulation material: Hard polyurethane foam

8.Controller: Japanese OYO or Korean TEMI human-machine interface touch screen controller

9.Freezing system: French Taikang fully enclosed compressor/404/23 environmentally friendly refrigerant

10.Protection device: Compressor overheating, overcurrent, overpressure, heating humidification air burn, box overheating, water shortage alarm system

11.Power supply: 380VAC ± 10%

12.Standard configuration:

13.Observation window (indoor lighting), one 50mm cable hole (located on the left side), two sets of sample racks (adjustable height), mobile work wheel, humidification water tank

5、 Product Introduction:Adopting a human-machine interface temperature and humidity controller with reliable performance, easy operation, advanced control technology, and significantly better cost-effectiveness than similar imported equipment, it is an ideal device for conducting alternating humidity and heat tests. Equipment tests the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials. Suitable for use in factories such as electronics, electronics, food, vehicles, metals, chemicals, and building materials. Can meet the following standards: GB2423.1-89 low temperature test method, GB2423.2-89 high temperature test method, GB2423-93 test D6 alternating humidity test method, IEC68-2-30 test method

Optional parts: communication interface, recorder, built-in glass door, and operating hole

Special requirements can be customized according to customer requirements

After sales service: This product is available for free on-site installation and debugging in China, with free delivery; The product comes with a one-year free warranty and lifetime service.

View more aboutPlease visit our company or call us for more information. We will be happy to serve you. Thank you!

Because we are professional, we are trustworthy!