major function

One temperature and one humidity monitoring product. When the temperature is too low (or too high), the humidity is too high, or condensation is about to occur, the corresponding load work will be automatically started. Can manually/automatically switch control load, set temperature and humidity to preset values.

Working mode: heating type and cooling type.

Specification

Power supply: AC220V ± 10% 50HZ (or specified by the user).

Working environment: temperature -20~70 ℃, relative humidity ≤ 95% RH.

■ Condensation control: 88% RH ± 5% RH (25 ℃).

■ Temperature control:

Heating type: The load works when the current temperature is ≤ 5 ± 2 ℃, and stops working when the current temperature is ≥ 15 ± 2 ℃. (The activation value can also be specified by the user).

Cooling type: The load works when the current temperature is ≥ 45 ± 2 ℃, and stops working when the current temperature is ≤ 30 ± 2 ℃. (The activation value can also be specified by the user).

Accuracy: ± 2 ℃.

Response speed: Typical value ≤ 5S.

■ Control output: 1x working voltage, rated power resistive load AC220V/3A × 1 (active output).

■ Volume: 48 × 48 × 78mm ³

Installation method

Base installation: Fix the 8-core base onto a 35mm guide rail or directly onto the mounting plate through mounting screw holes.

Embedded installation: Open 45 on the installation panel^+0.5mm×45^+0.5mmMm ² hole, fix the monitor on the panel through the installation bracket.