The WP-9000 series thermistor temperature transmitter (output loop power supply) inputs the on-site thermistor temperature signal, isolates and converts it into a linear (4-20) mA signal with temperature, and outputs it to the control system or other unit combination instruments. Some signal receiving devices come with a 24V power supply. Generally, temperature transmitters output active signals, which may cause power conflicts when connected. Using an output loop power supply type can avoid power conflicts and achieve signal isolation.

Intelligent thermal resistance temperature transmitter. It is possible to configure and set the type and range of thermal resistance.

This temperature transmitter has independent power supply mode and output circuit power supply interface requirements, with electromagnetic isolation between the power supply input circuit output circuit.

◆ Characteristics

● Two wire or three wire heating resistor temperature signal input, isolated transmission output (4-20) mA.

Output circuit power supply (12-35) V.

Intelligent, capable of on-site configuration settings. Fixed types of thermal resistors and temperature range inputs can also be selected.

Modular core design, no need for zero and full adjustment, automatic dynamic calibration of zero and automatic compensation for temperature drift.

Equipped with a working power indicator light.

● Input circuit overcurrent protection.

● Plug and unplug terminal block, DIN rail card installation.