WBSC-5000 microcomputer moisture analyzer

One Adopting standards:

GB/T 212-2007 "Method for determination of total moisture in coal"

GB/T 212-2008 "Industrial Analysis Methods for Coal"

II Scope of application:

Suitable for determining the total moisture content and analyzing the moisture content of coal, coke, coalfield geology, grain, tobacco, and other non-metallic substances, suitable for industries and departments such as coal, electricity, metallurgy, petrochemicals, coalification, and scientific research institutions.

IIITechnical Parameter

1Power supply voltage:AC220V±15％，50Hz

2Weighing resolution:0.001g

3Moisture determination accuracy: superior to national standards

4There are two radiation drying methods available: infrared and microwave. The microwave power can be adjusted and automatically executed by the program.

5AC power supply220V±10%

WBSC-5000Type microcomputer moisture analyzer

Suitable for both full moisture and analytical moisture. Weighing resolution:0.0001g

4 Microcomputer moisture analyzerWBSC-5000Performance characteristics of the model:

1The entire measurement process is automatically completed by microcomputer control and can be tested simultaneously9Sample size, serial communication, preparation of imported precision balance, high measurement accuracy.

2The position detection adopts a contactless switch, which is stable and reliable.

3Adopting single serial port operation control, reducing the requirements on the computer, simple and reliable.

4Specially designed to minimize microwave leakage.

5Adopting simplified circuits to reduce system failure rates.

The WBSC-5000 microcomputer moisture measurement system consists of a microcomputer system and an automatic moisture measurement system,Drying samples using microwave or infrared methods to measure moisture content is suitable for measuring the moisture content of various substances. Microwave drying is used for non-metallic material samples, which is fast and can be completed in just over ten minutes; Only infrared drying can be used for minerals containing metals, and moisture measurement can also be completed.