VIP member
WBE-9010B Computer Servo Tensile Testing Machine
This machine is widely used in rubber, film FPC、 The mechanical performance tests of adhesive tapes, non-woven fabrics, cast films, carrier tapes, res
Product details
product details
Product Features
1 . Adopting high-precision displacement, velocity, and load closed-loop control software
2. Transmission: Adopting high-precision ball screw transmission, high efficiency, high rigidity, small deformation, and low noise.
3. Drive: Powered by Panasonic servo motors from Japan, providing stable, adjustable speed drive with high speed, low vibration, and high-speed positioning.
4. Horizontal rail material: Made of 45 # die steel through grinding and processing, with a parallel error of ≤ 0.5mm and high rigidity;
5. Guidance: Adopting chrome steel poles and two column guidance from South Korea, with excellent wear resistance and coaxiality;
6. Displacement measurement: Using a Japanese LINE high pulse (2500r/p) photoelectric encoder to measure displacement, up to 0.001mm;
7. Force measurement: Using American TRANSCELL precision tension compression explosion-proof load cell, accuracy: 0.03% F.S
8. Control board: using self-developed 32-bit ARM chips for measurement and control, superior to the industry's 16 bit DSP processing technology, high resolution: 1/500000
9. Powerful software functions: can meet the testing of different materials, can simultaneously execute different standards, including foreign standards (with multiple standard data processing functions), units: N, kN, g, kgf, Ib, cN can be converted to each other. The experimental software designed completely according to the experimental standards has powerful functions. The experimental curve can be magnified to clearly show the amount and speed of data collection, as well as the smoothness of the curve, which can reflect the overall processing capability of hardware and software.
10. Test report and curve: The curve is accurate, the test report can be edited, and the test curve has a high degree of refinement, indicating a fast sampling frequency and a more obvious comparison with peers.
technical specifications
model |
WBE-9010 series 5KN |
||
WBE-9010B |
WBE-9010A |
||
capacity selection |
5. 10, 20, 30, 50, 100, 200, 300, 500N 1. 2, 3, 5kN Standard configuration with one range and optional three ranges |
||
accuracy class |
<1KN: Level 0.1 ≥ 1KN: 0.25 level |
<1KN: 0.25 level ≥ 1KN: Level 0.5 |
|
Load parameters |
Test force measurement range |
0.2% to 100% FS (full scale) |
|
Test force indication error |
Within ± 0.1%, ± 0.25%, and ± 0.5% of the B model indication (different ranges)/Within ± 0.5% of the A model indication (different ranges) |
||
Test force resolution |
The maximum test force of Model B is 500000/The maximum test force of Model A is 200000, The entire process is not divided into stages, and the resolution remains unchanged throughout the entire process |
||
Displacement parameters |
Displacement indication error |
Within ± 0.2% of B model indication/within ± 0.5% of A model indication |
|
Displacement resolution |
B model 0.015 μ m/A model 0.1 μ m |
||
|
control make join number |
Range of stress control rate |
B model 0.005-5% FS/s/A model 0.05-5% FS/s |
|
Stress control rate accuracy |
When the speed of Model B is less than 0.05% FS/s, it is within ± 1% of the set value, and when the speed is greater than or equal to 0.05% FS/s, it is within ± 0.5% of the set value; When the speed of model A is less than 0.1% FS/s, it is within ± 2% of the set value, and when the speed is greater than or equal to 0.1% FS/s, it is within ± 0.5% of the set value; |
||
Strain control rate range |
B model 0.005-5% FS/s/A model 0.05-5% FS/s |
||
Accuracy of strain control rate |
When the speed of Model B is less than 0.05% FS/s, it is within ± 1% of the set value, and when the speed is greater than or equal to 0.05% FS/s, it is within ± 0.5% of the set value; When the speed of model A is less than 0.1% FS/s, it is within ± 2% of the set value, and when the speed is greater than or equal to 0.1% FS/s, it is within ± 0.5% of the set value; |
||
Range of displacement control rate |
B model 0.001-500mm/min/A model 0.01-500mm/min |
||
Accuracy of displacement control rate |
B model is within ± 0.2% of the set value/A model is within ± 0.5% of the set value |
||
Relative error of force control rate |
Within+1% of the set value for model B/within+2% of the set value for model A |
||
Control range of constant stress, constant strain, and constant displacement |
B model 0.5%~100% FS/A model 1%~100% FS |
||
Constant stress, constant strain shape, and constant displacement control accuracy |
When the set value of Model B is ≥ 10% FS, it is within ± 1% of the set value. When the set value is ≥ 10% FS, it is within ± 0.1% of the set value When the set value of model A is ≥ 10% FS, it is within ± 2% of the set value. When the set value is ≥ 10% FS, it is within ± 0.5% of the set value |
||
|
host machine join number |
Dimensions (length, width, height) |
About 500 × 600 × 1500mm/1650mm |
|
Excluding fixture testing space |
850/1200mm or agreed upon |
||
Fixture center to column |
70mm (or agreed upon) |
||
power supply |
220V 50Hz，±10% |
||
power |
0.4KW |
||
Weight |
About 95KG |
||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-