1、 Product Overview

PD-1 detects the switch signal of the wired timing controller (Rainbird controller) valve, converts the drive signal of the wired valve into wireless control instructions, and wirelessly controls the ANC wireless extension on site to operate the valve on/off, so that the status of the corresponding valve on site is consistent with that of the wired timing controller valve. Effectively solving the trouble of repairing old wired system lines.

2、 Product Features

1. Take 24VAC power directly from the wired timing controller.

2. It can support valve control for up to 40 stations and 2 main valves.

3. Host the wireless relay on the 4th floor, where any wireless extension serves as both a valve controller and a wireless relay unit.

4. Automatically search for wireless relay links based on signal strength.

Within the wireless coverage range, it can support 100 sets of PD-1 wireless systems with different IDs to work simultaneously without interfering with each other's wireless signals. The ID can be easily programmed.

6. The hardware encryption function ensures that once the wireless extension is registered on PD-1, it cannot be directly used on other PD-1. It must first be logged out on the registered PD-1 before it can be registered and used on other PD-1, effectively protecting the security of outdoor wireless extensions.

7. Easy to use, simply connect the wires, register the wireless extension, and it can automatically network for use. The LCD display of PD-1 shows the status of on-site valves, wireless communication, and battery level, which is simple and clear.

8. The outdoor valve controller can be connected to a soil moisture sensor. As long as the soil moisture measured on site reaches or exceeds the pre-set moisture threshold, even if the scheduled irrigation time has not ended, the on-site controller can automatically close the valve to achieve the goal of saving water. It can be used to water less or less on rainy days.

3、 Main technical parameters of the product

1. Power supply: 24V AC ± 20% 50-60HZ

2. Standby current:<=100ma<>

3. Valve input signal: 24V AC ± 20%

4. Wireless frequency: 902-928 MHz

5. Wireless transmission power: less than 24dBW

6. Wireless first layer communication visual distance: ≥ 500 meters, maximum control radius: 2000 meters

7. Number of control valves supported: station valves 1-40, main valves 1-2