Ux-1000W wavelength dispersive X-ray fluorescence spectrometer
--Ux-1000W domestically produced spectrometer with good performance (2 inventions, 3 utility models, 1 design);
--Bottom illuminated design, does not pollute the window; 10 channel customization, flexible changes;
--Remote assistance function, quick problem-solving ability;
--National cement inspection standards are formulated for practical models.

Ux-1000W wavelength dispersive X-ray fluorescence spectrometer
--Nine channels including Si, Al, Fe, Ca, Mg, S, K, Na, and Cl - can be configured, with one reserved channel position for additional analysis of 10 elements simultaneously.
--The analysis of ten elements and oxides including Na, Mg, Al, Si, P, S, Cl, K, Ca, and Fe with standard configuration is an ideal choice for quality control in large and medium-sized enterprises.

Application industry:
--Building materials/cement
--Refractory materials/ceramics
--Metallurgical minerals/mining
--Metal materials
--Academic research and teaching
--Glass, graphite
--Soil investigation/elemental analysis
--Process control
--Ingredient quality control
--Ingredient detection
--Testing equipment
--Ingredient instruction control

Product Features:
Accurate testing can be completed in 1.1 minutes, with a sample change and vacuum extraction time of less than 15 seconds
2. Under illumination X-ray detection, * to avoid instrument failure caused by sample breakage and improve efficiency of use
3. Adopt high-precision flow density stabilizer (technology)
4. Analysis of ten elements and oxides including Na, Mg, Al, Si, P, S, Cl, K, Ca, Fe in standard configuration
5. Introduce advanced testing system technology and ensure short-term and long-term stability of testing*
6. Equipped with quantitative analysis methods such as empirical coefficient method, theoretical influence coefficient method, and basic parameter method
7. The testing accuracy is far superior to the reproducibility requirements of GB/T176-2008, easily meeting industry demands

Product Features:
1. Remote diagnostic function description: Our software integrates commonly used communication protocols of DCS systems, such as TCP/IP, OPC, ModBus, RS232/485, etc., and can exchange data with the control center or PLC of the factory's batching system. It can transmit analysis data to the batching system and also transmit proportioning data. Realize online data analysis and online quality monitoring.
2. A technical, fast, safe, reliable and practical sample loading and unloading system
3. The sample loading and unloading system with rocker arm design, complete powder protection method, pre vacuum chamber and limited position mechanism achieve high reproducibility, * *, and fast stability. Schematic diagram of 1000W optical path design,
The WDXRF dispersion method is based on the fluctuation of X-rays. According to Bragg's law (2dsin θ=n λ), the characteristic X-rays emitted by the sample and the scattered lines of the primary spectral lines are separated. Then, the characteristic X-rays of the tested element and the high-order lines of certain elements in the matrix are injected into the detector and converted into electrical signals. After amplification, the electrical signals are converted into digital signals through analog-to-digital conversion (ADC). The high-order lines, crystal fluorescence, etc. are filtered out by a pulse height analyzer, and the intensity of the characteristic X-rays is converted into concentration through data processing.
5. Ux-1000W continuously detects the intensity of Ca: Ka spectral lines for 72 hours, reaching Q<1.1. The intensity of Si: Ka spectral lines reaches Q<1.05, while other spectral lines can easily reach Q<1.02,
6.1000W has a good stable cycle: it adopts a series of advanced automatic control algorithms to achieve new levels of constant temperature control, oil temperature control, flow density stability control, and high-voltage power supply control, thereby greatly improving the testing stability of the instrument and approaching the theoretical limit. For the application industry, the accuracy of CaO content and SiO2 content is very important. Ux-1000W continuously detects the intensity of Ca: Ka spectral lines for 72 hours, reaching Q<1.1. The intensity of Si: Ka spectral lines reaches Q<1.05, while other spectral lines can easily reach Q<1.02. The stability of fluorescence intensity (including short-term and long-term stability) is extremely high. Extend the calibration cycle of the instrument to once a week. Combined with the use of imported Varian X-ray tubes (76um, 400W thin skin window) and imported high-voltage power supplies (60kV, 10mA), the stability of the product has reached the industry level.
The 7.1000W instrument adopts the WdxAnalyzer V1 workstation, with a software interface for human-machine dialogue, modular operation buttons, and multiple modes for operators with different permissions to log in with passwords and output reports.