Made entirely of stainless steel and made of 304 material, it meets GMP requirements and is mainly suitable for material crushing in industries such as pharmaceuticals, chemicals, and food.

working principle:

This machine utilizes the relative motion between the movable toothed disc and the fixed toothed disc, or the high-speed impact, knocking, and collision of the hammer on the material, as well as the mutual impact between the materials, to achieve crushing and pulverization of the material in the crushing chamber. This machine is equipped with a sieve, which can be replaced according to customer requirements. When the material is crushed to a diameter smaller than the sieve hole, the powder comes out of the sieve and falls into the aggregate bucket below. The dust floating in the bucket is sucked into the dust removal bag inside the dust removal box through the action of the dust removal motor for filtration, and the air is discharged outdoors by the fan.
Machine features:

1. The structure is simple, the crushing chamber is easy to assemble and disassemble, and easy to clean.
2. Smooth operation, low noise, and minimal vibration.
3. Easy to operate. Replacing the sieve can control the particle size.

matters needing attention:

1. The external power supply of this machine should be equipped with a suitable circuit breaker according to the machine power, in order to automatically cut off the power supply when the machine is overloaded or the current is too high, in order to protect the motor!
2. Ensure that there is a dedicated person to supervise this machine during operation.
3. The crushed material particles should not be too large. If the machine is shut down (i.e. the speed slows down significantly or stops running passively due to excessive load), the power should be cut off immediately.
If the particles being crushed are too large, they should be crushed by a universal crusher before being crushed by this machine.