Shanghai Baidian Instrument Equipment Co., Ltd. specializes in providingMeltblown cloth spinneret cleaning machine, meltblown cloth nozzle cleaning machine, meltblown cloth nozzle hole attachment cleaning machine

Washing method for melt blown fabric spinneret:

　　

After cleaning for 30 minutes, adjust the position of each spinneret and the front and back of the spinneret.

　　

3. Ultrasonic cleaning usually takes 60-90 minutes to clean thoroughly. The cleanliness of the water in the tank and the position of the spinneret cleaned by ultrasonic vibration waves are the main reasons for the cleaning. Therefore, maintaining the cleanliness of the water and frequently changing the position of the spinneret are the key factors.

　　

4. After ultrasonic cleaning, the spinneret should be promptly taken out of the water and the moisture in the surface and micropores should be blown dry with air.

　　

5. After cleaning the spinneret, it should be promptly assembled and placed in a clean and dry place or in the spinning body to prevent moisture and external dust.

Ultrasonic meltblown fabric mechanical cleaning machine, spot manufacturer customized

The ultrasonic cleaning machine can use ordinary water, and the suitable cleaning temperature for the water cleaning solution is 50-70 ℃. Especially in cold weather, if the temperature of the cleaning solution is low, the cavitation effect is poor, and the cleaning effect is also poor. Therefore, some cleaning machines wrap heating wires around the outside of the cleaning cylinder for temperature control. When the temperature rises, cavitation is prone to occur, so the cleaning effect is better. Often, meltblown fabric nozzles have problems with easy clogging and difficult cleaning, greatly affecting production efficiency and increasing production costs. At present, GuTe Ultrasonic provides cleaning agents for meltblown nozzle cleaning machines, which can quickly clean the attachments on the nozzle holes of meltblown fabrics, shorten the cleaning time, improve production efficiency, save production costs, and extend the service life of nozzles. The combined use effect is even more effective.

Ultrasonic meltblown fabric mechanical cleaning machine, spot manufacturer customized

Cleaning method with nozzle cleaning agent for melt blown machine

(1) After transporting the spray nozzle cleaned with high-pressure water back to the cleaning room, place it in the cleaning machine with the feeding hole at the bottom and the wire outlet hole facing upwards.

(2) Prepare cleaning solution for the spray nozzle of the velvet machine.

(3) Clean for 60 minutes at a water temperature of 50-70 ℃.

(4) Replace the cleaning solution and drain the water from the cleaning machine's water tank; Blow clean with compressed air.

(5) Secondary ultrasonic cleaning; Inject clean water (desalinated water or distilled water) and clean for 60 minutes at a water temperature of 50-70 ℃.

(6) Blow dry the water; After cleaning, lift out the spinneret and dry it with compressed air. Place it on the platform and cover it with a clean cloth for inspection

Ultrasonic cleaning machine for melt blown cloth mold cleaning method:

Step 1: High temperature calcination of the mold, residual carbon deposition after calcination, using an ultrasonic cleaning machine combined with water-based degreaser for cleaning

Step 2: Use organic solvents and ultrasonic cleaning machines to directly clean and dissolve residual polypropylene

Three steps: Wait for a moment, after cleaning is complete, the mold can continue to work.