Application of UV aging testing machine: This product uses fluorescent UV lamps as the light source,By simulating ultraviolet radiation in natural sunlight,Conduct accelerated weather resistance tests on materials and products to obtain results of aging resistance changes. Widely applicable to non-metallic materials and organic materials（For example: coatings, paints, rubber, plastics and their products）；

modelZN-T Internal dimensionsD×W×H 450×1170×500: mm　

1、 Technical parameters of UV aging testing machine:

1.Temperature range:RT+10℃～70℃

2.Temperature fluctuation: ≤ ±0.5℃

3.Temperature uniformity: ≤2℃

4.Temperature deviation: ≤ ±1.5℃

5.Lamp spacing:35mm

6.Distance between sample holder and lamp surface:100～350mmAdjustable up and down

7.Lamp power:40W/branch

8.Ultraviolet wavelength:280nm～400nm

9.Time setting range:0～9999hour

10.Power requirements:AC220V/50HZ

2、 Box material:

1.ABSA3Steel plate spraying treatment;

2.The inner liner is made of high-quality stainless steel plate;

3.The box door adoptsA3Anti static spray treatment of steel plate;

4.Installation at the top of the studio4branchUVSeries UV Lamp;

5.The heating method is high-speed heating of titanium alloy, with fast heating and uniform temperature distribution;

6.The box cover is a one-way push-pull type,Easy and effortless opening and closing;

7.The bottom of the test chamber is equipped with high-quality fixed lifting foot pads;

3、 Control system:

1.Adopting intelligent technologySAMWON-STSeries of Korean imported temperature control instruments,Control accuracy ±0.1℃；

2.Temperature control is adoptedP.I.D＋S.S.R,System co channel coordination control,Can improve the stability and lifespan of control components and interface usage;

3.Touch key setting, digital and direct display;

4.haveP.I.DThe function of automatic calculation,Can reduce the inconvenience caused by human settings;

5.The lighting control time can be set arbitrarily within one thousand hours;

6.In operation or setting, if an error occurs, a warning signal will be provided;

7.Schneider components from France;

8.Philips rectifier and starter (ensuring that the UV light can be turned on every time the device is turned on);

4、 Light source:

1.The light source adopts4branchUVThe rated power of the series is40WUsing ultraviolet fluorescent tubes as light sources（Lamp length1200mm）,Parallel distribution at the top of the test chamber;

2.Compliant with standard light tubesUVA-340perhapsUVB-313Light source for users to choose and configure;(Choose one)

3.UVA-340The luminous spectrum energy of the lamp tube is mainly concentrated in315nm～400nmBetween wavelengths;

4.UVB-313The luminous spectrum energy of the lamp tube is mainly concentrated in280nm～315nmBetween wavelengths;

5.Due to the gradual decay of fluorescent light energy output over time,In order to reduce the impact of light energy attenuation on the experiment,So this test box is available in all4Every3Zhou replaced an old lamp with a new one,The replacement method will3#Lamp removal2#Move the light tube to3#The location1#Move the light tube to2#The location4#Move the light tube to1#The location, in4#Installation of lamp tube position1Install a new light tube. In this way, the ultraviolet light source is always composed of new and old lamps,Thus obtaining a constant output of light energy;

6.Effective service life of domestic lamp tubes600～800Hours, imported light tubes1800～2000Hour;

5、 Heating system:

1.Adopting far-infrared nickel alloy high-speed heating electric heater;

2.Completely independent system,Does not affect the testing and control circuit;

3.The temperature control output power is calculated by a microcomputer,To achieve high-precision and high-efficiency electricity efficiency, it has the anti overheating function of the heating system;

6、 Safety protection device:

1.Protective door lock: If the lamp is on and the door of the box is opened,The machine will automatically cut off the power supply to the lamp tube,And automatically enter the equilibrium state for cooling,To prevent harm to the human body;

2.Over temperature protection inside the box: When the temperature inside the box exceeds80At ℃, the machine will automatically cut off the power supply to the lamp and heater,And enter the equilibrium cooling state;

7、 Equipment usage conditions:

1.Environmental temperature:5℃～＋28℃（24Average temperature within the hour ≤28℃）

2.Environmental humidity: ≤85%R.H

3.The operating environment requires good indoor ventilation,Place the machine in front, back, left, right, and right directions50Do not place things in centimeters;

8、 Compliant with standards: strictly followGB16776-2005Aging test standard manufacturing.

9、 Service commitment: Free home delivery,After the installation and debugging of the device is completed,Provide free operation training to relevant technical personnel at the user site,There is no limit to the number of people.