By connecting the USB devices in the factory to the local area network, you can access them from anywhere
Access and control these USB ports on a computer that can connect to a local area network (including wireless WiFi)
Equipment, its performance and reliability are like USB devices directly connected to the USB interface of a computer
Same as before, this makes USB devices no longer limited by geography and distance.
By extending the communication distance of USB, the network cable can pass through each switch
Extend the distance by 100 meters and use Ethernet fiber optic transceiver to extend several kilometers through fiber optic
To several tens of kilometers.
Easy to centrally monitor and manage USB in a certain area or even the entire factory LAN
Equipment.

Power supply voltage: 9-40VDC wide voltage supply, not afraid of voltage fluctuations, compliant
Compliance with power supply specifications in the industrial control industry.
Power consumption: The main body consumes 3W of power and can provide up to 10W of power to USB devices.
Supported operating systems: Windows 2K/XP/Vista/Win7 (32-bit and 64 bit)
Position) Mac OS X（V10.4.4-10.7.X）。
Compliant with USB 2.0 standard, supporting high speed (480M), full speed (12M), and low speed
Speed (1.5M) USB device.
The main body comes with 2 USB-A type interfaces, which can be expanded up to 12 through a USBHUB
A USB port.
The USB port has 15kV ESD protection and overcurrent protection.
The network port adapts to 10/100/1000M speed and supports DHCP automatic addressing.
The network port has MDI/MDI-X automatic jumper function, which can automatically adapt to straight through network cables and
Cross network cable.
The network port is equipped with transformer isolation protection, with an isolation voltage of 1500Vrms.
Supported protocol: TCP/IP, supports parameter settings through web browsers.
Working temperature: -20 to+75 ℃.
Dimensions: 85mm x 49mm x 100mm (length x width x height).
Weight: 150 grams.
Installation method: DIN35mm standard guide rail installation or bolt fixed installation.

The factory default settings for BBSea 510 are as follows:
Username: admin Password: admin IP Address: 192.168.1.100 Subnet Mask
Code: 255.255.255.0 Gateway: 192.168.1.1 Disable DHCP. Users according to
Need to enter the IP address of ULink300 in IE browser to enter the parameter modification page
Modify these parameters.

Restore factory settings:
Disconnect the power supply, hold down the reset button and do not release it, then turn on the power and wait for the network port to open
The connection indicator light will light up and start flashing regularly, then you can release it. At this point
BBSEA 510 has been restored to factory settings.