VIP member
UP-CYY-IV fully automatic infrared oil analyzer
The UP-CYY-IV fully automatic infrared spectrophotometer consists of fully automatic operating software, infrared spectroscopy system, and magnetic st
Product details
Compliant with standards:
Meets the national standard "HJ637-2012 Water Quality - Determination of Petroleum and Animal and Vegetable Oils - Infrared Spectroscopy Method".
Technical principle:
The UP-CYY-IV fully automatic infrared spectrophotometer consists of fully automatic operating software, infrared spectroscopy system, and magnetic stirring extraction system. It uses extraction solvents (CCl4 or C2Cl4) at a certain extraction ratio and adopts drum type three-dimensional stirring technology to extract oil from water. The extraction solution is then filtered through a filtering device to remove water and impurities and introduced into a colorimetric dish. Next, the infrared spectroscopy system is used for analysis and measurement. If a dedicated magnesium silicate filtration device is installed, it can also measure the content of petroleum and animal and vegetable oils. After measurement, the instrument automatically discharges waste and cleans the pipeline. The entire process is automated, without the need for operators to come into contact with carbon tetrachloride, including automatic sampling, extraction, water and impurity removal, measurement, cleaning, drainage, and data storage.
According to the HJ637-2012 national standard, magnetic stirring extraction is used to extract oil substances from water using carbon tetrachloride. Then, an oil-water separation membrane is used instead of anhydrous sodium sulfate to isolate impurities and moisture, separating the solution of oil and carbon tetrachloride, and determining the total oil content of the extract. At the same time, the extract can be adsorbed with magnesium silicate, and after removing polar substances such as animal and vegetable oils, petroleum can be determined. The total extract and petroleum content were calculated based on the absorbance A2930, A2960, and A3030 at spectral bands with wave numbers of 2930 cm-1 (stretching vibration of C-H bond in CH2 group), 2960 cm-1 (stretching vibration of C-H bond in CH3 group), and 3030 cm-1 (stretching vibration of C-H bond in aromatic ring), respectively. The content of animal and vegetable oils is calculated based on the difference between the total extract and petroleum content.
Technical parameters of UP-CYY-IV fully automatic infrared oil analyzer:
Product features of UP-CYY-IV fully automatic infrared oil analyzer:
1. Fully automated: Oil testing is fully automated, with automatic sampling, extraction, water filtration, measurement, drainage, cleaning, and can continuously produce 6-10 water samples;
2. The instrument is equipped with a multi touch computer control terminal; It has the functions of intelligent automated processing of information, storage, printing, and saving as Excel documents, and can also be operated externally on a desktop computer;
3. Health and safety: Extraction and other operations do not require personnel involvement and do not come into contact with carbon tetrachloride, ensuring the health and safety of operators;
4. High extraction efficiency: Adopting high-efficiency and stable drum type magnetic stirring extraction technology, the extraction rate is greater than 95%;
5. Possessing core technology: Equipped with backwash function, the amount of carbon tetrachloride can be selected arbitrarily, and imported oil-water separation membrane filtration can be configured to replace anhydrous sodium, effectively removing water and impurities. One membrane can be used about a hundred times;
6. Reagents such as tetrachloroethylene can be used for fully automated extraction and detection, replacing the highly toxic carbon tetrachloride solution;
7. The extraction method complies with the national standard HJ637-2012, and the extraction results are consistent with those of the national standard method;
8. Equipped with a magnesium silicate adsorption column, it can be upgraded to measure mineral oil and animal and vegetable oil. Installing a sampler can be upgraded to an online monitoring device;
9. The true three wavenumber and infrared three wavenumber spectra are clear, displaying the absorption spectra and absorbance generated by the three wavenumbers;
10. One click calibration: wavelength positioning, automatic detection and calibration of blank and standard oil samples;
11. One click completion: Adjusting the blank and testing multiple water samples can be completed with one click, making it convenient to operate;
12. Quality assurance of spare parts: Imported solenoid valves, air pumps and other accessories are used to ensure the durability of the instrument and effectively reduce the failure rate;
13. The entire system is made of acid, alkali, and carbon tetrachloride resistant materials, which are fully corrosion-resistant and non oleophilic. The cleaning process is carried out to reduce cross contamination;
14. Automatic dilution enrichment: The dilution enrichment ratio can be set arbitrarily;
15. Windows full system control: using operating systems such as Windows 7 or Windows 10 for control;
16. Adopt stable and mature methods NET4.0 platform green installation free oil analyzer software.
Application scope of UP-CYY-IV fully automatic infrared oil analyzer:
Environmental monitoring systems are used to measure the oil content in surface water, groundwater, and industrial wastewater in testing rooms and laboratories such as petrochemical, hydrological and water conservancy, water supply companies, sewage treatment plants, thermal power plants, steel enterprises, university research and teaching, agricultural environmental monitoring, railway environmental monitoring, automobile manufacturing, marine environmental monitoring, transportation environmental monitoring, and environmental research.
Meets the national standard "HJ637-2012 Water Quality - Determination of Petroleum and Animal and Vegetable Oils - Infrared Spectroscopy Method".
Technical principle:
The UP-CYY-IV fully automatic infrared spectrophotometer consists of fully automatic operating software, infrared spectroscopy system, and magnetic stirring extraction system. It uses extraction solvents (CCl4 or C2Cl4) at a certain extraction ratio and adopts drum type three-dimensional stirring technology to extract oil from water. The extraction solution is then filtered through a filtering device to remove water and impurities and introduced into a colorimetric dish. Next, the infrared spectroscopy system is used for analysis and measurement. If a dedicated magnesium silicate filtration device is installed, it can also measure the content of petroleum and animal and vegetable oils. After measurement, the instrument automatically discharges waste and cleans the pipeline. The entire process is automated, without the need for operators to come into contact with carbon tetrachloride, including automatic sampling, extraction, water and impurity removal, measurement, cleaning, drainage, and data storage.
According to the HJ637-2012 national standard, magnetic stirring extraction is used to extract oil substances from water using carbon tetrachloride. Then, an oil-water separation membrane is used instead of anhydrous sodium sulfate to isolate impurities and moisture, separating the solution of oil and carbon tetrachloride, and determining the total oil content of the extract. At the same time, the extract can be adsorbed with magnesium silicate, and after removing polar substances such as animal and vegetable oils, petroleum can be determined. The total extract and petroleum content were calculated based on the absorbance A2930, A2960, and A3030 at spectral bands with wave numbers of 2930 cm-1 (stretching vibration of C-H bond in CH2 group), 2960 cm-1 (stretching vibration of C-H bond in CH3 group), and 3030 cm-1 (stretching vibration of C-H bond in aromatic ring), respectively. The content of animal and vegetable oils is calculated based on the difference between the total extract and petroleum content.
Technical parameters of UP-CYY-IV fully automatic infrared oil analyzer:
| Project | TECHNICAL INDEX |
| detection limit | DL<0.002mg/L (measured 11 times blank and calculated 3 times standard deviation) |
| Wavenumber range | 3400cm-1 to 2400cm-1 (i.e. 2941nm to 4167nm) |
| Range of absorbance | 0.0000-2.0000 AU (i.e. transmittance of 100-1% T) |
| Water sample measurement range | 0.001-50000mg/L (dilution or enrichment extraction measurement method) |
| Instrument measurement range | （0.02～900）mg/L |
| repeatability | RSD ≤ 1% (tested 11 times for 20-100mg/L oil standard sample) |
| Measurement accuracy | <±2 % |
| correlation coefficient | R>0.999 |
| Volume of water sample taken | 5ml-600ml or 5ml-1000ml |
| Sample size for testing | Continuously test 6-10 samples |
| Extraction amount of carbon tetrachloride | Integer multiples of 5ml |
| Automatic detection time for a single sample | 2-10 minutes (the more samples taken, the longer the extraction time) |
| Wave number accuracy and wave number repeatability | ±1cm-1 |
| Net weight of the host | 25kg |
| Use power supply | (220 ± 22) V, (50 ± 1) Hz, 50VA |
| Use temperature and humidity | Temperature range 1 ℃ -40 ℃, humidity ≤ 90% |
| external dimensions | 450mm (length) x 400mm (width) x 550mm (height) |
Product features of UP-CYY-IV fully automatic infrared oil analyzer:
1. Fully automated: Oil testing is fully automated, with automatic sampling, extraction, water filtration, measurement, drainage, cleaning, and can continuously produce 6-10 water samples;
2. The instrument is equipped with a multi touch computer control terminal; It has the functions of intelligent automated processing of information, storage, printing, and saving as Excel documents, and can also be operated externally on a desktop computer;
3. Health and safety: Extraction and other operations do not require personnel involvement and do not come into contact with carbon tetrachloride, ensuring the health and safety of operators;
4. High extraction efficiency: Adopting high-efficiency and stable drum type magnetic stirring extraction technology, the extraction rate is greater than 95%;
5. Possessing core technology: Equipped with backwash function, the amount of carbon tetrachloride can be selected arbitrarily, and imported oil-water separation membrane filtration can be configured to replace anhydrous sodium, effectively removing water and impurities. One membrane can be used about a hundred times;
6. Reagents such as tetrachloroethylene can be used for fully automated extraction and detection, replacing the highly toxic carbon tetrachloride solution;
7. The extraction method complies with the national standard HJ637-2012, and the extraction results are consistent with those of the national standard method;
8. Equipped with a magnesium silicate adsorption column, it can be upgraded to measure mineral oil and animal and vegetable oil. Installing a sampler can be upgraded to an online monitoring device;
9. The true three wavenumber and infrared three wavenumber spectra are clear, displaying the absorption spectra and absorbance generated by the three wavenumbers;
10. One click calibration: wavelength positioning, automatic detection and calibration of blank and standard oil samples;
11. One click completion: Adjusting the blank and testing multiple water samples can be completed with one click, making it convenient to operate;
12. Quality assurance of spare parts: Imported solenoid valves, air pumps and other accessories are used to ensure the durability of the instrument and effectively reduce the failure rate;
13. The entire system is made of acid, alkali, and carbon tetrachloride resistant materials, which are fully corrosion-resistant and non oleophilic. The cleaning process is carried out to reduce cross contamination;
14. Automatic dilution enrichment: The dilution enrichment ratio can be set arbitrarily;
15. Windows full system control: using operating systems such as Windows 7 or Windows 10 for control;
16. Adopt stable and mature methods NET4.0 platform green installation free oil analyzer software.
Application scope of UP-CYY-IV fully automatic infrared oil analyzer:
Environmental monitoring systems are used to measure the oil content in surface water, groundwater, and industrial wastewater in testing rooms and laboratories such as petrochemical, hydrological and water conservancy, water supply companies, sewage treatment plants, thermal power plants, steel enterprises, university research and teaching, agricultural environmental monitoring, railway environmental monitoring, automobile manufacturing, marine environmental monitoring, transportation environmental monitoring, and environmental research.
keywords
- Fully automatic infrared oil analyzer
- UP-CYY-IV
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-