UHB corrosion-resistant and wear-resistant slurry pump is suitable for sulfuric acid with a concentration of less than 80%, nitric acid with a concentration of less than 50%, various concentrations of hydrochloric acid, and liquid alkali. It is suitable for both clear liquids and slurries, and is suitable for both acidic and alkaline clear liquids and slurries. It is corrosion-resistant and wear-resistant, and can be used for multiple purposes with one pump. The UHB pump body is made of steel lined ultra-high molecular weight polyethylene, with a lining thickness of 8-20mm. There are two types of impellers: separated and closed, which can be selected according to the medium conditions. Seals: K-type power seal, VK type seal assembly. UHB mortar pumps are used in the sulfuric acid phosphate fertilizer industry, chemical and other enterprises, non-ferrous metal smelting industry, steel enterprises, water treatment industry, chlorine alkali industry, and supporting wet desulfurization and dust collectors. The UHB corrosion-resistant and frosted slurry pump can be used in alkaline, acidic, and corrosive positions simultaneously, making it an ideal equipment for civilized factories.

UHB corrosion-resistant and wear-resistant mortar pump

Performance range of UHB corrosion-resistant and frosted slurry pump:
1. Operating temperature -20 ℃ -80 ℃ (for special requirements and material changes, it can be designed to -80 ℃ -220 ℃)
2. Imported diameter from 32mm to 250mm
3. Flow rate 5-400m3/h
4. Lift within 80m

UHB steel lined plastic corrosion-resistant and wear-resistant mortar pump

The meaning of UHB pump model:
50UHB-ZK-20-30
50 represents the inlet diameter of the pump
UHB stands for ultra-high molecular weight polyethylene
Z represents impurity pump
K represents power seal
20 represents traffic
30 represents head

4、 Performance parameter table:

Note: All models above can be equipped with explosion-proof motors