The design concept of Easidew transmitter is simplicity and ease of use, and its integrated features are designed to simplify installation and usage services as much as possible. This fully configured and calibrated transmitter makes dew point measurement as easy as temperature and pressure measurement for the first time, and can be directly integrated into your air or gas management and control system. highlight Two wire power supply circuit connection Dew point unit or ppm moisture content unit IP66 (NEMA 4) Excellent sensor protection Range -100~+20 ° C Working temperature -40~60 ° C Fast response speed
technical indicators
performance Dew point range -Dew point at 100~+20 ° C Dew point accuracy ± 2 ° C dew point response time T95 is 5 minutes (from dry to wet) repetitiveness Dew point at 0.5 ° C Input/Output output signal 4-20 mA (two-wire) active output, customizable across the full range Dew point -100~+20 ° C -148 ~ +68°F 0-3000 ppmV ppmVThe output or non-standard output range must be specified when placing the order power supply voltage 12–28 V DC resistive load Maximum 250 Ω @ 12 V 500 ohms @ 24 V Current consumption Maximum 20mA The impact of power fluctuations ±0.005% RH/V operating condition requirements Operating Temperature -40 ~ +60°C Operating Humidity 0–100% RH work pressure Maximum 45 MPa (450 barg) traffic 1 ~ 5 Nl/min， Installed inside the standard sampling sleeve; 0 to 10m/sec， Direct insertion type temperature coefficient Temperature compensation has been made within the working temperature range mechanical properties Sealing protection level The corresponding standard for IP66 is BS EN 60529:1992, And the corresponding standard NEMA 250-2003 for NEMA 4 Shell material stainless steel size L=132mm x ø27mm Mounting Thread 5/8' - 18 UNF weight 150g filter HDPE protective cap 80 μ m stainless steel protective cap (optional) electrical connection See table interchangeability Sensors are interchangeable Fault Overview (Factory settings) situation output Sensor malfunction 23 mA Dew point below range 4 mA Dew point exceeds the range 20 mA