
characteristic
- The organic combination of swirl, fluidization, jetting, and crushing classification technologies.
- Compact equipment, small size, high production efficiency, continuous production, achieving "small equipment, large production".
- High drying intensity, low energy consumption, and thermal efficiency of over 70%. Energy saving equipment.
- The material has a short residence time, good product quality, and can be used for drying heat sensitive materials.
- Negative pressure or micro pressure operation, good sealing, high efficiency, and elimination of environmental pollution.
- This machine is a new type of drying equipment developed by our factory and professional design institutes, based on the digestion and absorption of advanced foreign equipment and technology, for drying paste like, filter cake like, and thixotropic, thermosensitive powder like materials. Our factory can conduct drying tests on various materials for users, provide data and assist in selection.
Application scope
Organic compounds: atrazine (pesticide insecticide), lauric acid, benzoic acid, benzoic acid, fungicide, sodium oxalate, acetate fiber, etc.
Ceramics: kaolin, silica, clay, etc.
Dyes: anthraquinone, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various azo dye intermediates.
Food category: soy protein, gelatinous starch, distiller's grains, wheat pond, wheat starch, etc.
Structure Introduction
![]() |
1. Supply fan 2. Another heater 3. Air distributor 4. Blender 5. Spiral feeder 6. Drying machine 7. Grader 8. Cyclone disperser 9. Star shaped unloader 10. Bag filter 11. Induced draft fan |
Technical Parameter
model |
Cylinder diameter (mm) |
Host size (mm) |
Host power (kw)
|
Processing air volume (m3/h) | Evaporation water volume | Occupation area (m2) |
SXG-2 | 200 | 250×2800 |
0.75~2.2
|
300~800 | 10~20 | 3500×2500 |
SXG-3 | 300 | 400×3300 | 3~4 | 600~1500 | 20~50 | 3800×2700 |
SXG-4 | 400 | 500×3500 | 4~7.5 | 1250~2500 | 25~70 | 4000×3000 |
SXG-5 | 500 | 600×400 | 5.5~11 | 1500~4000 | 30~100 | 4200×3200 |
SXG-6 | 600 | 700×4200 | 7.5~18.5 | 2500~5000 | 40~200 | 4250×3250 |
SXG-8 | 800 | 900×4600 | 11~18.5 | 3000~8000 | 60~600 | 4500×3500 |
SXG-10 | 1000 | 1100×5000 | 15~30 | 5000~12500 | 100~1000 | 4750×3750 |
SXG-12 | 1200 | 1300×5200 | 15~37 | 10000~20000 | 150~1300 | 5000×4000 |
SXG-14 | 1400 | 1500×5400 | 30~55 | 14000~27000 | 200~1600 | 5250×4250 |
SXG-16 |
1600 | 1700×6000 | 45~75 | 18700~36000 | 250~2000 | 5500×4500 |
Note: The evaporation rates listed in the table are applicable to the inlet and outlet temperatures, and may vary for special materials.
|
Detailed Introduction
The hot air enters the bottom of the dryer through a tangent line and forms a strong rotating wind field driven by the agitator. The paste like material is fed into the dryer by a spiral feeder, and under the strong action of high-speed rotating stirring blades, the material is dispersed by impact, friction, and shear. The block like material is quickly crushed, fully contacted with hot air, heated, and dried. The dehydrated dry material rises with the hot air flow, and the grading ring intercepts large particles. Small particles are discharged from the center of the ring outside the dryer and are recovered by the cyclone separator and dust collector. Undried or large particles are thrown towards the wall by centrifugal force and fall back to the bottom for crushing and drying.