VIP member
Product details
Main technical parameters
|
model project
|
SS300 |
SS450 |
SS600 |
SS800 |
SS1000 |
SS1200 |
SS1500 |
||
|
turn
speed |
internal diameterD |
mm |
300 |
450 |
600 |
800 |
1000 |
1200 |
1500 |
|
heightH |
200 |
220 |
320 |
400 |
400 |
450 |
500 |
||
|
caliberd |
160 |
260 |
400 |
560 |
700 |
900 |
1100 |
||
|
Filter areaS |
㎡ |
0.17 |
0.27 |
0.55 |
0.88 |
1.10 |
1.62 |
2.02 |
|
|
Effective volumeV |
L |
10 |
20 |
45 |
90 |
140 |
205 |
345 |
|
|
Loading limitG |
kg |
12 |
25 |
55 |
115 |
175 |
255 |
430 |
|
|
turn speedn |
r/min |
2100 |
1700 |
1400 |
1200 |
1000 |
900 |
600 |
|
|
Separation factors |
C |
740 |
728 |
658 |
645 |
560 |
544 |
302 |
|
|
Motor power（4Extreme) |
KW |
1.1 |
1.5 |
3 |
5.5 |
7.5 |
11 |
15 |
|
|
Whole machine quality |
kg |
130 |
180 |
580 |
1000 |
1300 |
1800 |
3500 |
|
|
Outside shape ruler inch |
long |
mm |
500 |
600 |
1200 |
1550 |
1700 |
1900 |
2300 |
|
wide |
480 |
600 |
1200 |
1550 |
1700 |
1900 |
2300 |
||
|
high |
460 |
670 |
810 |
980 |
980 |
1150 |
1300 |
||
Structural characteristics
1. Industrial centrifugal dewatering machines are all equipped with a three legged suspended pendulum structure, which can effectively reduce the foot vibration caused by the unbalanced load inside the hub during operation.
2. The shell and top cover are made of high-quality stainless steel, the cage base and chassis are made of cast iron material, and the water outlet pipe is located below the chassis.
3. The spindle is made of steel that has undergone heat treatment and precision machining.
4. The transmission part adopts triangular tape transmission, and the centrifugal starting wheel is directly driven by the motor, which can slowly start the machine and gradually reach the design speed to ensure smooth operation of the machine.
5. There is a brake opening and closing arm inside the machine, which has good braking performance and can quickly stop the machine.
Operation method
1The machine is placed on a horizontal surface and connected using a delta connection to ensure that the inner chamber of the machine rotates clockwise.
2Spread the filter cloth evenly inside the centrifuge liner, ensuring that the filter cloth is tightly attached to the bottom and walls of the liner as much as possible. The excess filter cloth on the upper edge of the liner should be evenly stuffed into the gap between the liner and the outer shell.
3Place the material that needs to be dehydrated evenly and smoothly into the soy sauce,The materials placed should not exceed the larger capacity of the machine.
4startmachineYue Jing30 seconds, the machine reaches normal operationhigh speedOperation, the water outlet pipe begins to release a large amount of water.
5Machine operation approximately1-3After about a minute, if there is basically no water flowing out of the outlet pipe, the power can be cut off. After 1-2 minutes, slowly cut it off in several timesClick the brakeBrake the opening and closing arms, and the machine stops.
6Never put materials into the machine during operation to prevent the high-speed rotating drum from throwing materials out and injuring people and objects.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-