Thin film evaporatorcharacteristic:

f seriesThin film evaporatorTechnical features:

★Using an independent control loop to manage heating time, heat sensitive substances can also be concentrated in their optimal state

★Circulating warm water through a glass water jacket to heat the evaporator tube, with accurate temperature control and easy observation of the concentration state

★The recovery bottles for distilled liquid concentrate are equipped with drain plugs, which can be operated to remove the sample and achieve continuous operation

★The rotating blades are directly connected to a high torque fixed DC brushless motor,Can concentrate high viscosity samples.

★There are also specifications suitable for high temperatures,The maximum set temperature can reach200℃.

Rotation speed range: 140~1200rpm (continuously variable transmission)
Evaporation capacity: 1140mL/h (circulating water and warm water at 70 ℃)
Reaching vacuum level: Vacuum pump capacity+133.3Pa (1Torr)
Temperature setting range: Room temperature+5-180 ℃ (MF-10C)
Rotation setting · Display: Film type key input setting · Digital display
Anti slip pad for rotating shaft: vacuum anti slip pad
Evaporation tube: water jacket heating type, evaporation area 0.04 cubic meters (MF-10A • B)
Condenser: Vertical double serpentine tube, cooling area of 0.3 square meters
Heating section: Type A and B require an external constant temperature bath, while Type C requires an 800W quartz heater
Recycling bottle: 1L × 2 (with drain plug)
External dimensions and weight: 625W × 400D × 1416H · approximately 40kg
Product features:

1. The thin film concentration device is mainly used for the concentration and refining of high viscosity substances, easily foaming substances, and thermosensitive substances, with high concentration efficiency;
2. The rotating blades of the MF-10 series thin film evaporation device are directly connected to a high torque fixed DC brushless motor, which can concentrate high viscosity samples;
3. The material of the evaporator tube is transparent hard glass, which can observe the concentration state;
4. The MF-10C model uses a covered resistance heater and stainless steel evaporator tube for high-temperature experiments. The maximum set temperature can reach 180 ℃;
5. The MF-10B model is equipped with a liquid level sensor, which can control the injection amount of the sample.