1. The WBW series microcomputer controlled insulation material testing machine is developed for conducting various physical and chemical performance tests on composite mortar insulation systems, polystyrene board thin plaster exterior wall insulation systems, hard polyurethane foam composite board exterior wall insulation systems, and other exterior wall insulation systems and roof insulation materials.

2. The WBW series microcomputer controlled insulation material testing machine adopts a design concept, with beautiful appearance, easy operation, and performance. The computer uses the fully digital control system (PCI card) developed by our company, directly controls the servo speed control system and servo motor rotation. The speed of the AC servo motor is reduced by the deceleration system and transmitted to the ball screw pair to achieve actions such as raising, lowering, and testing of the crossbeam, completing mechanical performance tests such as tensile and compressive testing of the sample.

3. The testing machine software automatically calculates data and indicators such as elastic modulus, yield strength, tensile strength, fracture strength, specimen elongation, stiffness of the damping system, deformation under constant force, and force under constant deformation. It can meet the closed-loop control mode of constant displacement, constant stress, and constant deformation, and the testing process can be programmed and controlled according to standard requirements. The control and data processing of the experimental process by the computer control system comply with the requirements of the corresponding metal and non-metal material standards, and the test reports are diversified in various ways such as WORD, EXECEL, etc.

4. This machine is pollution-free, has low noise, and has a wide speed range. This machine is suitable for testing the mechanical performance indicators of various metals, non metals, and composite materials, and fully meets the requirements of relevant standards.

5. This machine is used for material inspection and analysis in industries such as building materials, aerospace, machinery manufacturing, wire and cable, rubber and plastic, automotive manufacturing, and shock absorption systems. It is an ideal testing equipment for scientific research institutions, colleges and universities, industrial and mining enterprises, technical supervision, commercial inspection and arbitration departments.

According to the standard:

1. JC/T992-2006 "Adhesive for Expanded Polyethylene Board for Wall Insulation"

2. JC/T993-2006 "Expanded Polyethylene Board Plaster for External Wall Insulation"

3. JC/T547-2005 Ceramic Tile Adhesive

4. JG149-2003 "Expanded Polystyrene Board Thin Plastered External Wall Insulation System"

5. JC890-2001 "Masonry mortar and plastering mortar for autoclaved aerated concrete"

6. JC/T907-2002 "Concrete Interface Treatment Agent"

7. JG158-2004 "Rubber Powder Polystyrene Particle External Wall Insulation System

8. DBJ01-38-2002 "Technical Specification for Construction of External Wall Insulation - Polymer Cement Mortar Adhesive"

9. DBJ/T01-50-2002 "Technical Specification for Construction of External Wall Insulation - Flexible Waterproof Putty"

Structural performance:

1High strength host:The product adopts a dual space door structure, with the upper space stretched and the lower space compressed and bent. The host part consists of four guide columns, an upper crossbeam, a middle crossbeam, and a workbench, forming a floor standing frame. The speed control system is installed at the lower part of the workbench. The AC servo motor with high speed regulation accuracy, wide range, and stable performance drives the ball screw pair to rotate through the synchronous toothed belt reduction system. The ball screw pair drives the middle crossbeam and drives the stretching auxiliary tool (or compression, bending and other auxiliary tools) to move up and down, realizing the loading and unloading of the sample. This structure ensures that the rack has sufficient rigidity while achieving efficient and smooth transmission.

Portal frame structure, integral stamped shell, clean and elegant appearance.

Ball screws only withstand tensile forces, effectively extending their lifespan and rigidity stability

Screw pair loading method, double nut back tightening to eliminate clearance, ensuring high rigidity and high dynamic performance of the system

Jinan Zhongyan specializes in testing machines related to insulation materials. With mechanical design, we produce practical testing machines and provide after-sales support to ensure your safety.