VIP member
Thermal abuse (thermal shock) testing machine
The heat abuse test shall be carried out as follows: After fully charging the battery according to the test method specified in 4.5.1, place the batte
Product details
Technical parameters of thermal abuse (thermal shock) test chamber
1、 Hot abuseThe experiment shall be conducted according to the following steps:
Connect the battery according to4.5.1After being fully charged according to the prescribed test method, place the battery into the test chamber. Test box（5±2）℃/minThe temperature rise rate is increased when the temperature inside the box reaches130℃±2Maintain a constant temperature after ℃ and continue to do so30min.
The battery should not catch fire or explode.
2、 Main technical parameters
|
rule grid |
model |
CZ－RL－01 |
|
internal volume |
175L |
|
|
studio dimensions |
Approximately W50 × H70 × D50cm |
|
|
Overall dimensions |
Approximately W88 × H168 × D73cm |
|
|
box body knot constitute |
structure |
monolithic |
|
outer box material |
High quality thickened cold-rolled steel plate (gray+blue) baked paint |
|
|
Inner box material |
High quality thickened stainless steel |
|
|
observation window |
Tempered glass observation window (350×400mm double-layer explosion-proof glass） |
|
|
LED lighting |
||
|
Exhaust device |
Configure forced exhaust device |
|
|
pressure relief device |
Configure automatic pressure relief port |
|
|
main want skill technique point mark |
Control method |
PLC touch screen |
|
temperature range |
RT+10℃～+150℃(Customizable) |
|
|
heating rate |
RT→+150 ℃ ≤ 5 ℃/min (average throughout the entire process) |
|
|
resolution |
0.1℃ |
|
|
volatility |
±0.5℃ |
|
|
bias |
≤2.0℃ |
|
|
uniformity |
≤2.0℃ |
|
|
Standard Configuration |
Host and sample rack 2Insulation epoxy resin sample partition |
|
|
power supply voltage |
AC220V 50Hz、AC380V 50HZ |
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-