Main features and advantages Main performance indicators
500, 300, 100 MHz bandwidth models
2-channel and 4-channel models
16 digital channels (MSO series)
Sampling rate of 2.5 GS/s on all channels
Record length of 5 M points on all channels
>Maximum waveform capture rate of 50000 wfm/s

Complete set of advanced triggers
Easy to use features
Wave Inspector ® Control function, easy navigation and automatic search for waveform data
29 automatic measurement FFT analysis methods to simplify waveform analysis
TekVPI ® The probe interface supports active probes, differential probes, and current probes, with automatic calibration and unit determination
9-inch (229 mm) WVGA widescreen color display
Small in size and lightweight - only 5.8 inches (147mm) thick and weighing only 9 pounds (4 kilograms)
Connection ability
The USB 2.0 host ports on the front and back panels enable quick and easy storage of data, printing, and connection to USB keyboards
The USB 2.0 device port on the back panel allows for easy connection to a PC or direct printing compatible with PictBridge ® The printer
Integrated 10/100 Ethernet port for networking and video output, exporting oscilloscope display to monitor or projector
Optional serial triggering and analysis function
I2C, SPI, CAN, LIN, RS-232/422/485/UART and I2S/LJ/RJ/TDM automatic serial triggering, decoding, and search options
Mixed Signal Design and Analysis (MSO Series)
Parallel automatic triggering, decoding, and search functions
Multi channel establishment time and holding time trigger
MagniVuTM high-speed acquisition technology provides a fine timing resolution of 121.2 ps on the digital channel
Optional application support
power analysis
HDTV and custom video analysis
The main digital acquisition mode on the MagniVuTM high-speed acquisition technology MSO3000 series will capture up to 5 M points at 500 MS/s (2 ns resolution). In addition to the main recording, the MSO3000 also offers an ultra-high resolution recording called MagniVu, which captures 10000 points at up to 8.25 GS/s (121.2 ps). Collect the main waveform and MagniVu waveform at each trigger, and switch between running or stopping at any time on the display screen. MagniVu's timing resolution is significantly finer than similar MSOs on the market, providing peace of mind when conducting critical timing measurements on digital waveforms.
The P6316 MSO probe provides two 8-channel adapter clips, simplifying the connection with the device.

The unique probe design of P6316 MSO provides two eight channel adapter clips, simplifying the process of connecting the device under test. When connected to square pins, P6316 can directly connect the heads of 8 × 2 square pins with a center distance of 1/10 inch. When higher connection flexibility is required, you can use the built-in fly wire harness and grab bucket to clamp onto surface mounted equipment or test points. P6316 provides outstanding electrical features, with a capacitive load of only 8 pF and an input impedance of 101 k Ω.
Trigger specific data packets passing through the I2C bus. The yellow waveform represents the clock, and the blue waveform represents the data. The bus waveform provides decoded packet content, including Start, Address, Read/Write, Data, and Stop.