Developed and manufactured by Beijing Hako, there are usually two testing methods: one is the shape image analysis method; The second method is the weighing method The latter is commonly referred to as a wetting balance or a permeation contact angle meter But currently there are many applications, and the most direct and accurate measurement method is still the shape image analysis method The principle of the shape image analysis method is to drop liquid droplets onto the surface of a solid sample, obtain the shape image of the droplets through a microscope lens and camera, and then use digital image processing and some algorithms to calculate the contact angle of the droplets in the image

Technical parameters and principles of surface tension tester:

lSurface/Interface Tension Test Range: 0-400mN/m

lSurface/interface tension measurement accuracy: ± 0.1mN/m

lSurface/interface tension display accuracy: ± 0.01mN/m

lMeasurement range of liquid density: 0-1000g/cm³

lSensor range: 0-120g

lSample stage upgrade speed: 0-10mm/Sec

lSample stage upgrade distance: 0-80mm

lSample table lifting accuracy: ± 0.1mm

lSample pool size: Φ50mm

lMeasurement software: SFT-D

lTemperature range: 0-98 ℃

lInstrument size (mm): 360 * 360 * 620

lWeight: 25Kg

Technical parameters and functions of surface tension tester:

lHanging method

lHanging ring method

lLiquid density