TZPG spray drying granulator

characteristic:
1. M-type atomizing disc is equipped on the new atomizer
Can produce spherical powders with good fluidity.
Can produce granulation products with uniform particle size distribution.
It can reduce the amount of wall sticking on the flight line.
Adjustable average particle size.

2. High recovery rate
Adopting a low cap method to improve the recovery rate of granulation products.

3. Prevent product cross contamination
Equipped with a high-temperature and high-efficiency filter.
Positive pressure operation can be carried out in the drying room.

4. Easy to clean
The hot air chamber can be disassembled for cleaning.
The corners of the drying room are all processed into an R shape.

It can improve the recovery rate of fine powder, clean exhaust gas, and prevent pollution.

6. Easy to operate and reliable to run
The hot air temperature can be automatically controlled within ± 0.5% of the set value.
Due to the implementation of miniaturization, it occupies less space and is easy to operate.
Operating conditions can be selected within a wide range.
Can produce granulation products with good morphology.
Adjustable average particle size.
By replacing various atomizing discs, the particle size distribution and loose packing density can be adjusted.
Has reliable reproducibility.

Compared with other models, the installation area and installation height have been reduced by about 20% and 50% respectively.
This model is widely used by well-known manufacturers in the precision ceramic industry both domestically and internationally, and has received unanimous praise.

Morphology of special ceramic granulation powder