TY-BS portable soil pH meter

The electronic digital four in one soil analyzer is the latest soil rapid testing device, mainly used to test the pH, moisture, temperature, and plant light intensity of soil. It uses a 9V carbon battery and is easy to operate. The probe length is 200 millimeters. This instrument measures parameters through LCD display. This instrument also has low battery indicator and automatic power disconnection function. It saves time and energy, and is highly efficient. This instrument is suitable for planting flowers and grass, as well as landscaping.

1、 Features of portable soil moisture analyzer:

1. Measure the current ambient light intensity

LOW -, LOW, LOW+, NOR -, NOR, NOR+, HGH -, HGH+

2. Measure the moisture content of soil

DRY+, DRY, NOR, WET, WET+

3. Measure soil temperature, temperature measurement range: -9~+50 ℃ (16~122 ℉), (accuracy: 1 ℃/1 ℉)

4. Measure the acidity and alkalinity of soil, pH measurement range: 3.5-9.0

Working temperature:+ 5℃~+40℃

Size: 122mm * 63mm * 36mm

Weight: 0.23KG

Large screen LCD user interface

LED backlight auxiliary lighting, convenient for reading

Temperature conversion function between metric and imperial systems

Low battery warning function

Power saving automatic shutdown function, no operation for 5 minutes, automatic shutdown

Easy to operate and convenient to carry

Power supply: 9V battery

2、 Usage of portable soil moisture analyzer:

Please install the battery and remove the probe protective cover before use

1. Light measurement

A. Press the ON button to turn on the instrument

B. Aim at the window of the highest point light source light sensor.

C. The current intensity of light will be displayed on the LCD monitor.

Tip: Please do not block the light or create shadows on the light sensor

2. PH range measurement

A. Press the PH/TENP button at the pH position on the back

B. Insert the probe vertically into the soil and conduct the test as soon as possible. Do not insert the probe too deeply and damage the roots of the plant.

C. Press the 【 ON 】 button to start measuring.

D. The tested pH value will be displayed on the LCD screen

E. Measure multiple times to obtain the exact value needed.

Tip:

1. Insert the probe vertically at the edge of the plant stem in the middle.

2. Please gently push in the soil survey to avoid damaging the probe.

If the soil being measured is too dry or fertile to accurately measure the pH value, the user can sprinkle some water and measure it again half an hour later

3. Moisture measurement

Press the 【 PH/TENP 】 button on the back of the TEMP button

Insert B vertically into the soil as much as possible. Do not insert the probe too deeply and damage the roots of the plant.

Press the NO button to start measuring

The soil moisture value of the D test will be displayed on the LCD screen.

Measure multiple times to obtain the exact value required.

4. Temperature measurement;

When measuring humidity, the soil moisture value will be displayed on the LCD screen simultaneously.

Press the 【 ℃/℉ OFF 】 button to set the humidity display to ℃ or ℉.

Tip: If the user does not insert the probe into the soil, the accurate external space temperature will be displayed.