T40 single gas detector/portable gas detector-Global supplier

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

18628167688
Address

Room 902-2, Building 1, Zhaoxin International, No. 86 Wuxing Road, Wuhou District, Chengdu City

Contact Now

T40 single gas detector/portable gas detector

Contact Supplier

More Products

Product details

The T40 instrument adopts a sturdy engineering plastic shell and a good protective design, which can be used in variable and abnormal climate environments such as deserts or the Arctic Circle. The instrument is compact and lightweight, making it easy to clamp onto belts, shirt pockets, or helmets. The ultra large LCD display screen can clearly read the gas concentration, type, peak value, and high/low concentration alarm levels. If the current gas concentration values exceed the preset limit, the instrument will alert the user with sound, light, and vibration alarms. The peak hold function can capture and record the maximum reading detected since the first power on. The unique and simple flip operation can complete calibration (this design has been patented in the United States).
T40 has been certified by China Coal Safety (MA).

performance

advantage

Two year guarantee

Provide a 24 month guarantee,
Reduce the total cost of ownership,
Full protection.

Internal vibration alarm

In areas with high noise and lighting, if the gas concentration increases, it will prompt the user. Standard configuration.

Replaceable "AA" alkaline battery

Choose convenient and cost-effective battery power sources.

Weighing 3.5 ounces (99.2 grams)

Small size, light weight, can be worn on belts, shirt pockets, work clothes or helmets.

Flip up calibration function.

T40 Rattler has a unique built-in design
Calibration adapter can make calibration work easier and eliminate the process of searching for calibration cups.

Approved and certified by ATEX, UL, cUL, and AUS

The T40 Rattler is the most widely recognized single gas monitor on the market, demonstrating the integrity of its design and suitability for global applications.

Peak/hold function

Using this device, users can record CO or H since the last peak reading was reset₂The maximum exposure value of S.

LCD display reading

Sustainable display of atmosphere
Actual concentration of CO or H2S in PPM and remaining battery life.

The accessory carried by the safety helmet is installed inside the clip.

Using T40 within the breathing area,
Method: The user clicks the device into the slot on the edge of the safety helmet. Due to its close proximity to the ears and eyes, the warning indicator is easily recognizable.

Radio frequency interference (RFI)
The protection function has been verified by ATEX as European
Standard EN50270.

Eliminate the "harassment" caused by cross interference from handheld radios and mobile phones.

Adjustable low/high alarm set point

Users can configure the T40 Rattler to meet a wide range of different application requirements.

High visibility chassis

The color of T40 allows it to be clearly identified from a distance, enabling safety personnel to determine that workers are being protected.

5Second delay shutdown protection function

The on/off button of T40 Rattler needs to be held down for five seconds before shutting down, so it will not cause accidental shutdown.

Shell:

High visibility, impact resistant composite material, with radio frequency interference (RFI) protection function.

Size:

3.375" x 2.3" x .75" (86 mm x 58 mm x 19 mm)

Weight:

3.5 ounces (98 grams)

Sensor:

CO, H₂S - Electrochemistry

Range:

gas	symbol	range	increment
carbon monoxide	CO	0-999ppm	1 ppm
carbon monoxide	CO (only version 4.83)	0-1999ppm	1 ppm
hydrogen sulfide	H₂S	0-499ppm	1 ppm
hydrogen sulfide	H₂S (only version 4.83)	0-999ppm	1 ppm

Power supply (running time):

Replaceable "AA" alkaline battery (with a regular working time of approximately 1500 hours)

Temperature range:

Normally:- 4 ° F to 122 ° F (-20 ° C to 50 ° C)

Humidity range:

Under normal conditions: 15 to 95% RH

Alarm device:

Adjustable low/high alarm set point

authentication:

Underwriters Laboratories (UL) and cUL - Level 1, Groups A, B, C, D
Canadian Standards Institute: Level I, Groups A, B, C, D
CENELEC (ATEX) and Australia - EEx ia IIC T4

CO、 H2S
Carbon monoxide, hydrogen sulfide
Product brochure
Product manual
Product Quick Operation Guide
China Certification
Coal Mine Safety Certification
CMC Measurement Instrument License
Explosion proof certification
CTB999 Explosion proof Certification
Type approval

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content