Stainless steel axial fans are widely used, which generate airflow in the same direction as the axis of fan blades such as electric fans. The fan used in air conditioning is an axial fan.. It is called "axial flow" because the gas flows parallel to the fan shaft. Axial flow fans are usually used in situations where flow requirements are high and pressure requirements are low. Axial flow fan is fixed in position and moves the air. Axial flow fans are mainly composed of fan impellers and casings, with a simple structure but high data requirements.

The T35-11 (T40-11) series axial flow fan is a new type of fan designed and improved in China in the 1980s based on the T30-11. Compared with T30-11 fan, it has obvious advantages: ◆ more reasonable structure ◆ greatly improved performance, with a total pressure effect of 89. 5%. ◆ Low noise, with a 3% reduction in noise (compared to A-weighted sound level). 6dB(A)。 This series of fans is suitable for transporting flammable, explosive, and non corrosive gases. The ambient temperature shall not exceed 60 ℃. Widely used in general factories, warehouses, offices, residential ventilation or strong heat dissipation, it can also be installed in series in long exhaust pipes to increase the pressure inside the pipes. The disassembled motor can be used as a free fan. The anti-corrosion axial flow fan (FT35-11 type) is made of anti-corrosion material coated with epoxy coating. The motor adopts a special anti-corrosion motor to transport corrosive gases. Explosion proof axial flow fan (BT35-11) is used for transporting flammable and explosive gases. The impeller is made of aluminum alloy to prevent sparks during operation. The motor is explosion-proof. The performance parameters and external dimensions of FT35-11 and BT35-11 fans are the same as those of T35-11 fan. The fan should be equipped with bracket feet and motor voltage, please specify when ordering.

→ Installation instructions for stainless steel axial flow fan ◆ Before installation, the fan should be carefully inspected for damage and deformation. If there is damage or deformation, installation can only be carried out after appropriate repairs. During installation, attention should be paid to checking whether the lower part is loose, and the gap between the blades and the gate should be uniform, without collision. The weight of the pipeline connecting the air outlet should not be borne by the fan head, and additional support should be provided during installation. The air outlet of the fan must be equipped with an air collector and a protective net. The fan base must naturally connect with the foundation plane. Do not strike the base for forced connection to prevent deformation of the base. During the installation process, the base should be calibrated, padded with an iron plate, kept in a horizontal position, and then the anchor bolts should be tightened. After installation, experiments must be conducted first, and only after normal operation can it be officially used.