VIP member
Swiss Bosch Proceq Equotip 550 Rockwell hardness tester
The Proceq Equotip 550 Rockwell portable hardness tester follows the traditional Rockwell static testing method and is particularly suitable for scrap
Product details
product description
Swiss Bosch Proceq Equotip 550 Rockwell Hardness Tester - Portable Static Hardness Testing. The Proceq Equotip 550 Rockwell portable hardness tester follows the traditional Rockwell static testing method and is particularly suitable for scraping, polishing, or thin-walled components as well as profiles and pipelines. Combined with the Proceq Equotip Leeb impact device, the Proceq Equotip 550 can be extended according to the principle of Leeb hardness using dynamic (rebound) methods. This also allows Leeb to automatically correlate the actual indentation hardness values with portable Rockwell on site. The fixed hardness tester can only accommodate test pieces of limited size. The portability of Proceq Equotip 550 portable Rockwell is suitable for outdoor, factory, and laboratory environments.
The Proceq Equotip 550 portable Rockwell probe can be directly connected to a PC or laptop for real-time user guidance and hardness testing display. The Proceq Equotip 550 portable Rockwell hardness tester uses sharper indenters and smaller loads compared to fixed hardness testers. The testing and measurement comply with the standards of DIN 50157 (metal) and ASTM B724 (aluminum). The conversion of Rockwell hardness to many other units follows ISO 18265 and ASTM E140, respectively. Can be used for materials such as chromium nickel iron alloy and duplex stainless steel.
| characteristic | ||
  |
The measurement results in HRC and HV are automatically converted to HB, HRA, HRB, and other universal scales, in compliance with ASTM E140 and ISO 18265 Algorithm options, used for moreFast measurementThe probe can be directly connected to a PC |
|
Specially designed for small components
Especially suitable for scratch sensitive and polished parts or small components, profiles, and pipelines. The required minimum thickness for reliable hardness readings is ten times the depth of indentation. For quality, there are no minimum requirements. Suitable for various sample geometries - the probe can use special measuring clamps and support feet to detect various geometries, with numerous hardness units - measurements in HRC and HV units can be automatically converted to HB, HRA, HRB, and more universal units that comply with ASTM E140 and ISO 18265 standards. Suitable for any environment - Equotip 550 Portable Rockwell can be used in on-site, factory, and laboratory environments with almost no restrictions.
|
accessory |
Measurement clamp |
|
Round standard foot (magnetic)Suitable for flat parts and detection positions with edge distances greater than 10 mm. The legs of the tripod are designed specifically for inspection parts that require precise positioning (welding, heated areas). The special feet RZ 18-70 and 70 ∞ are designed specifically for curved test pieces such as cylindrical components, tubes, and conduits. |
Supporting device Z1For flat components, a thickness of 40mm is required Support device Z2 for small cylindrical components, wires, bolts, with a small diameter of 3 mm Support device Z4 is suitable for pipes and conduits with a diameter not exceeding 28 mm Support device Z4+28 is suitable for pipes with a diameter exceeding 28 mmSubines and conduits |
Equotip Portable RockwellThe measurement principle follows the traditional Rockwell hardness static testMeasurement method. UseEquotip Portable RockwellAccurate use during probe measurementThe control force presses the diamond indenter into the test piece. When applying a load and releasing itContinuously measure the depth of penetration of the diamond indenter. Apply two restrictions through recordingDepth of indentation under load dCalculate the difference between 1 and d2:Δ=D2- d1. This passageOften referred to as plastic deformation.
|
Technical specifications for Equotip 550 Rockwell portable hardness tester |
|
|
principle |
Portable Rockwell 50N(Static): Measure the indentation depth of the diamond pressed into the test piece |
|
standard |
DIN 50157 |
|
Time |
*Many more 5 second |
|
Original unit |
μm, μinch |
|
Available units |
HB, HV, HRA, HRB, HRC, HR15N, HR15T, HMMRC, MPA |
|
Expanding detection methods |
richter scale, UCI |
|
probe |
50N |
|
Measurable object |
Small objects, ultra-thin objects, polished objects, circular small objects, medium-sized objects, very hard objects, large objects |
|
display |
7”Color touch screen（800 x 480Pixel) |
|
Memory |
internal8 GBFlash memory（> 1’000’000Measurement value) |
|
Connection |
USBEthernet and free software |
|
power supply |
Replaceable battery（> 8Hour battery life) |
|
language |
support 11 Languages and time zones |
|
personalization |
User profile, user view |
|
User guidance |
Screen prompts, guides, and electronic manuals |
|
report |
PCSoftware, direct reporting and custom reporting |
|
Measuring accessories |
3 Special support feet, with 3 A measuring clamp with a special support platform |
|
calibration block |
16test block |
|
Equotip Portable Rockwellaccessory 354 01 200 Equotip Portable Rockwell Measurement Clamp 354 01 130 EquotiPortable Rockwell tripod 354 01 250 Equotip Portable Rockwell Special Feet RZ 18 - 70 354 01 253 Equotip Portable Rockwell Special Feet RZ 70 - ∞ 354 01 243 Equotip Portable Rockwell supports Z2 measurement clamp 354 01 229 Equotip Portable Rockwell supports Z4+28 measurement Clamp (suitable for pipes and conduits with a diameter greater than 28 millimeters) 354 01 228 Equotip Portable Rockwell supports Z4 measurement clamp (Suitable for pipes and conduits with a diameter not exceeding 28 millimeters) |
Equotip Portable Rockwelltest block
Calibrated by recognized institutions |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-