■Product Features

（1）Roughness measurement

*High precision roughness analysis can be performed on flat surfaces, inclined surfaces, cylindrical surfaces, inner hole surfaces, circular arc surfaces, spherical surfaces, etc

*Suitable for multiple roughness standards（GB/T3505-2000，GB/T6062-2001,GB/T10610-1998Etc.)

*equipX-YWorkbench significantly improves operability.

*Automatic calibration function.

*A wide range, high-resolution detector and a direct drive component provide superior high-precision measurements among similar products.

*Equipped with an easy-to-use control box for starting/Stop measuring, returning, and other operations. The upper part of the drive department/Lower position andXFine tuning operations such as axis movement.

*The instrument is equipped with a computer and specialized measurement software, making it more intuitive and convenient to operate, with high accuracy and stability, and convenient for report printing and data storage.

（2）Contour measurement

*Measure dimensional tolerances such as distance, angle, radius, and period, and measure holes and small dimensions that cannot be measured by coordinate measuring machines, portrait instruments, projectors, etc.

* Can record graphics.

*Fast measurement speed. Reduce the retention time of the tested substance and the occupation of personnel time.

*Human error is reduced, and anyone can measure it.

*Can be connected to a computer for measurement and analysis through software

■Instrument parameters:

1、 Roughness measurement

Xaxle(Drive unit)

1.measuring range: 100mm

2.resolution: 0.5μm

3.Length reference:High precision displacement sensor

4.Drive speed: 0 – 10mm/s

5.measurement speed: 0.5 - 2mm/s

Zaxle(Column)

1.type:Electric operation

2.vertical movement: 350mm

detector

1.Range/Resolution: 1000μm / 0.01μm

2.Measuring needle tip: 2um

3.Indication error: ±5%-—±7%

4.Measurement repeatability: ± 3% -—-±5%
5.type:Differential inductance type

6.Control of the driving device:Manual orPCoperate

evaluation parameters

1.Ra, Rq, Rz, Ry, Rz(JIS), Ry(DIN), Rc, Rp, Rpmax, Rpi, Rv, Rvmax, Rvi,

Rt, Rti, R3z, R3zi, R3y, S, Pc (Ppi), Sm, HSC, mr, dc, plateau

ratio,

mrd, Rk, Rpk, Rvk, Mr1, Mr2, Da, Dq, la, lq, Sk, Ku, Lo, Lr, A1, A2

Sampling length

1.0.08mm, 0.25mm, 0.8mm, 2.5mm, 8mm

Data compensation functionTilt compensation,Rplane(curved surface)

Compensation, elliptical compensation, parabolic compensation,

Hyperbolic compensation, quadratic curve automatic compensation, polynomial compensation, polynomial compensation

Automatic compensation

1.2、 Contour measurementmeasuring range:≤

2.100mmresolution: 0.1μ

3.mmeasurement speed: 0.2, 0.5、

4.1mm/smeasurement direction:

5.backwardIndication accuracy:±(3.5+2L/100)μ

m* L =Measuring length

6.(mm)Needle up/down operation:

7.Arc-shaped motionMeasuring needle direction:

8.downwarddynamometry

9.: 10 - 30mNMeasuring needle tip radius: 25μm,