VIP member
Standard type (0.1um resolution) LGF series probe
Standard type (0.1um resolution) LGF series probe
Product details
542-181/182 Sanfeng Standard LGF Linear Micrometer
542 series grating micrometer - standard design
characteristic:
The resolution of the LGF series micrometer is 0.1 μ m.
2. Factory workshop. Excellent dust/water protection level reaches (IP66) protection level.
Technical parameters:
Accuracy: Refer to performance parameters (excluding quantization bias)
resolving power: 0.1μm
Length benchmark: Transmission type photoelectric linear encoder
Maximum response speed: 400mm/s
Measuring needle: ø 3mm hard alloy
axle sleeve: ø 8mm or ø 15mm
Bearing type: Linear ball bearing
Force measurement: refer to performance parameters
Output signal: 90 degree phase difference, differential square wave (RS-422A equivalent)
Signal spacing: 0.4μm
Dust/water protection level: up to IP66 protection standard
Performance parameters:
Item number |
542-181 |
542-182 |
|
measuring range |
10mm |
25mm |
|
Resolution |
0.1µm |
||
Measurement accuracy (20 º C) |
(0.8+L/50) µ m (L=any measured length (mm)) |
||
Quantitative bias |
±1 |
||
Force measurement |
The measuring rod is facing upwards |
Below 1.0N |
Below 4.0N |
Horizontal measuring rod |
Below 1.1N |
Below 4.3N |
|
The measuring rod is facing downwards |
Below 1.2N |
Below 4.6N |
|
Length benchmark |
Photoelectric linear encoder |
||
Response speed * 1 |
400mm/s |
||
output signal |
90 º phase difference, differential square wave (RS-422A equivalent) with minimal edge spacing, 200ns |
||
Output signal spacing |
0.4µm |
||
weight |
About 310g |
About 350g |
|
Dust/water protection level * 2 |
Achieve IP66 protection level (only for micrometer) |
||
Measuring head |
ø 3mm hard alloy (fixing screw: M2.5 (P=0.45) × 5) standard probe No.901312 |
||
Clamp sleeve |
ø8mm |
ø15 |
|
Bearing type |
Linear ball bearing |
||
Output cable length |
2m (extending directly from the micrometer device) |
||
Connector |
Plug: RM12BPE-6PH ( HIROSE ) , Compatible sockets: RM12BRD-6S ( HIROSE) |
||
Operating temperature (humidity) range |
0-40 º C (RH 20-80%, no condensation) |
||
Storage temperature (humidity) range |
-10-60 º C (RH 20-80%, no condensation) |
||
Standard attachments |
Special wrench for measuring head: No.538610 |
Special wrench for measuring head: No.210187 |
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-