stainless steelPlate CentrifugeIt is a filtration equipment for closed program operation and intermittent operation; By adopting a planar structure, the mechanical center of gravity is reduced, and high viscosity liquid damping shock absorbers can effectively solve vibrations. The material is added to the drum from the top, and under the action of centrifugal force, the liquid phase is discharged from the machine through the filter medium, while the solid phase is trapped in the drum.

After stopping the machine, lift out the liquid blocking cover and filter belt together and discharge them to the designated location. It has the characteristics of large capacity, high efficiency, easy operation, fast material discharge, good security performance, clean environment, and low labor intensity.

Flat centrifuge is suitable for filtering suspensions containing solid particles ≥ 0.01 millimeters, especially for filtering toxic and flammable materials. It is widely used in industries such as chemical, pharmaceutical, food, and light industry. For example: gypsum, thiamine, saltpeter, iron sulfate, copper sulfate, nickel sulfate, potassium chloride, acetic acid, borax, soda, rubber additives, dyes, plastic raw materials, soap, oil, various resins, salt, monosodium glutamate, food additives, starch sugar, vitamins, herbicides, insect repellents, copper, zinc, aluminum and other mineral powder dehydration.

The structure design of the flat centrifuge is reasonable, effectively eliminating hygiene blind spots. The structural components are smoothly converted, and the surface is polished. The external structure, fasteners, and drum are made of stainless steel. The shell is flip type, which can thoroughly clean the space between the centrifuge shell and the drum compartment.
Flip cover of the shell, equipped with feeding tube, washing tube, observation mirror, and lighting hole.
Configure an online cleaning system to clean the inner wall of the centrifuge casing, the inner and outer surfaces of the drum, the surface of the collection tank, and other invisible parts inside the centrifuge to meet cleanliness requirements and comply with relevant standards.
The structure is simple and easy to operate and maintain. Strong universality and wide applicability. Solid phase can be used for the separation of granular suspensions and also for the separation of fibrous materials.
The non-contact energy braking system, which can be started smoothly by a frequency converter and has an adjustable separation coefficient, is equipped with an anti-static belt transmission body with a sealed structure made of silicone rubber or fluororubber. It can meet the requirements of airtight explosion-proof and is suitable for applications in toxic, flammable, and explosive environments.
Configure a nitrogen protection system to isolate the centrifuge chamber from the external air.

1. The centrifuge should be placed on a level and sturdy floor or platform, and efforts should be made to keep the machine in a horizontal position to avoid machine vibration during centrifugation.
2. Turn on the power switch, install the required rotor as required, place the sample pre balanced with a tray balance on the rotor sample rack (the centrifuge tube must be balanced with the sample at the same time), and close the machine cover.
3. Press the function selection key to set various requirements: temperature, speed, time, acceleration, and deceleration. Machines with computer control also need to press the storage key to remember the input information.

1. Abnormal noise has occurred. If the flat centrifuge produces noise or other abnormal phenomena, it should be inspected. Adjust, repair, and troubleshoot the entire body!
2. Make good inspection records. During the operation of the flat centrifuge, the centrifuge can be recorded in the test chamber, and the fault situation, cause, and solution of the centrifuge can be recorded in detail!
3. Check the main parameters of the centrifuge. Ensure that the main technical parameters of the centrifuge (such as vibration, noise, temperature rise, etc.) meet the relevant standards during operation
4. Check the wear and tear of the relevant accessories of the centrifuge. According to relevant regulations, establish the scrapping cycle for centrifuges. If cracks are found in key components such as the drum, spindle, seat, and hood, which have no repair value, they should be immediately forcibly discarded.