Stainless steel circular vibrating screen is a type of product that uses a dedicated vibration motor as the vibration source. This series of products is widely used for screening and filtering various dry, wet, and geometric shaped materials. Its characteristics are high performance, low noise, and equipped with a bouncing ball device for eliminating blockages and a separated screen that is easy to change. The entire machine has a fully enclosed structure, with no dust or liquid spillage, and can operate continuously. It is an essential equipment for industries such as chemical, pharmaceutical, plastic, food, mining, abrasives, ceramics, etc.

1. High screening accuracy and efficiency, suitable for any type of powder, particle, or mucus.
2. The new grid structure has a long service life for the mesh, and it only takes 3-5 minutes to replace the mesh.
3. All parts in contact with the material are made of stainless steel.
4. The material is automatically discharged and can be operated continuously.
5. Fully sealed dust does not fly, liquid does not leak, mesh is not blocked, screening can reach 500 mesh, and filtration can reach 5 μ m.
6. Small size, light weight, fast start-up, low noise; The direction of the discharge port can be changed arbitrarily along the circumferential direction.

1. Uniform feeding. The feeding amount shall be based on the equipment processing capacity. Excessive feeding at once hinders the normal movement of materials on the screen surface, which not only causes fatigue and looseness of the screen mesh, but also reduces the material processing capacity. Providing a large amount of materials at once can cause a sudden increase in the load on an unbalanced motor, resulting in motor damage and reduced lifespan. If the feeding amount does not reach the processing capacity of the equipment, it wastes energy and reduces production.
2. A buffer hopper must be installed, and the material directly impacts the mesh surface, which not only consumes the excitation force generated by the vibration source, but also easily causes damage to the mesh surface and fatigue of the screen mesh, affecting the output and screening filtration output.

1. As the vibration source of the circular vibrating screen, the vibration motor has a long working time. Special attention should be paid to the maintenance of the vibration motor, and the bearing oil should be changed on time to avoid damage due to lack of oil.
2. The sieve should also be observed on time. When there are problems such as unevenness or damage on the surface of the sieve, or blockage of the sieve holes, specialized tools should be used immediately for cleaning. A spare sieve should be prepared. If the sieve is damaged and cannot be repaired, a new spare sieve should be replaced immediately.
3. Before using the circular vibrating screen, please observe the support invariant system and pay attention to whether there are loose screws or drops. If you understand the damage of the support invariant system, it should be repaired before using the machinery.
4. Although vibration screening and grading machinery does not require lubricating oil, it still needs to be observed on time and must be inspected once a year. The main maintenance tasks include replacing screws, lining plates and other parts, and repairing the screen surface.