Stainless steel UV photolysis exhaust gas treatment equipment 1: UV photocatalytic oxygen purification equipment workbench exhaust gas - exhaust hood - air duct - pressurized fan - exhaust gas treatment spray tower, gaspass throughbeginningLayer partition fillingMaterial layer Water mist, delivered to the layer After passing through the partition packing layer and water mist treatment，againDischarging into nature through a defogging layer.

2： Spray towers are generally operated in a gas-liquid countercurrent manner. Waste gas enters the tower from the bottom and passes through the packing layer from bottom to top. Absorption liquid is evenly sprayed into the packing layer by the top distributor and flows downwards along the surface of the packing layer until the bottom of the tower is circulated by a water pump. Due to the upward airflow and downward absorption liquid during the filling processThe material layer continuously undergoes gas-liquid countercurrent two-phase full contact absorption neutralization reaction, so the solute in the rising gas flow continuously contacts, and the solute concentration in the gas flow becomes lower and lower, while the solute concentration in the decreasing liquid becomes higher and higher. The gas-liquid concentration inside the tower varies continuously along the tower height, and the gas stays in the packing layer for treatment effect. After dehydration through the demisting layer Only then can it be discharged into nature.

3： Before starting the fan, turn on the water pump and let it circulate for 3 to 5 seconds to fully wet the packing layer before pressing the fan button.

4： The processing effect is good. Plasma deodorization equipment has a small footprint Easy installation, low water and power consumption indicators Corrosion resistance. Long service life, reliable equipment operation, simple and convenient maintenance.

Guangxi Stainless Steel UV Plasma Waste Gas Purification Equipment Lanzhou Stainless Steel UV Plasma Waste Gas Purification Equipment