Application of Stainless Steel UV Curing Machine:
Widely used for UV surface coating of mobile phone cases, digital cameras, and electronic plastic cases; Circuit board components, glass adhesives, electronic components, LCD panels, terminal seals, mobile phone component bonding, plastic component bonding, and drying and curing of UV adhesives in the LCD industry
Stainless steel UV curing machine appearance:
Size:
A. Total length of 2 meters, outer width of 0.8 meters
b. The distance from the bottom to the mesh belt is 0.75 meters, the mesh belt width is 0.6 meters, the feeding part is 0.5 meters long, and the discharging part is 0.5 meters long,
c. The light source section is 1.2 meters high, and the feeding port height is 0.20 meters,
d. The front and rear are equipped with adjustable baffles, and the height of the feeding port can be adjusted freely. The outer shell is made of a 2-centimeter cold plate bent,
e. High temperature electrostatic spraying on the surface of the whole machine; Corrosion resistant and easy to clean
f. The bottom is equipped with four brake type movable casters, making it easy for the machine to move
Power supply section:
Power supply 380V, 16A, 7KW, three-phase five wire system.
Transmission part:
a. Adopting imported speed regulating motor, the speed is uniformly adjustable from 0.5 to 5 meters, and the control speed is uniform and stable. It is equipped with a 120W imported speed regulating motor and a 50 type gearbox.
b. Imported black PTFE mesh belt. The bottom is equipped with a chain track. The bottom of the mesh belt is equipped with a non powered small drum for dragging, and the front and rear are equipped with adjustable active and passive drums
Light source section:
a. Two sets of 2KW imported UV light sources are used.
b. Equipped with original Japanese lamp tubes, evenly distributed in the furnace (with step-up transformers, reflectors, lamps, capacitors), and equipped with UV mirror reflection devices, greatly improving the utilization rate of ultraviolet light by up to 35%.
c. Each group of UV lamps can be controlled separately and can be adjusted up and down. Above the furnace cover, there is a knob handle for adjusting the height of the UV lamp tube, which is suitable for UV light fixation of different specifications of flat products.
d. Equipped with an automatic timer, it can monitor the usage time of the lamp at any time, facilitating the replacement of the lamp Each set of lamp tubes is individually equipped with imported quartz insulated glass, effectively preventing its infrared heat from radiating to the product to avoid being affected by high temperatures.
Exhaust section:
Adopting forced air cooling, the unique louver air inlet and separate small door in the UV zone can be opened at any time for easy cleaning. Equipped with one Jiuzhou high air volume centrifugal upper exhaust fan, each 0.37KW, and one 0.75KW lower exhaust fan, it contains four imported air inlet small fans, effectively reducing the temperature of the product and the UV furnace, and improving the service life of the lamp tube
6. Adopting a closed structure, electronic speed regulation, and conveyor belt transmission method Adopting a complete set of imported UV system, the light curing effect is significant, sturdy and durable The machine is equipped with an exhaust system that can remove heat from the light curing chamber at any time, extending the service life of the lamp tube