Stainless steel G-type screw pumpbrief introduction

G-type screw pump is a new type of pump that works according to the principle of rotary meshing displacement. The main working components of G-type screw pump are eccentric screw (rotor) and fixed liner (stator). The G-type screw pump uses non-toxic and odorless edible rubber, with a working temperature of up to 120 ℃. Due to the special geometric opening of these two components, they form separate sealed chambers. The medium flows uniformly in the axial direction. The internal flow rate is reduced while the volume remains unchanged. The pressure is stable, so there will be no product turbulence or agitation. The output pressure of each stage pump is 0.6MPa-1.2MPa, with a head of 60m-120m (for clean water), and the self-priming height is generally above 3m. Due to the selection of multiple elastic materials for the stator, G-type screw pumps have characteristics that general pump types cannot handle for conveying fluids with high viscosity up to 80% and conveying media containing hard suspended particles or fiber media. Its flow rate is proportional to the rotational speed and is widely used in industrial sectors such as food metallurgy, papermaking, printing and dyeing, chemical industry, fertilizer and pharmaceuticals. The G-type screw pump has fewer parts,

Stainless steel G-type screw pumpparameter

purpose

1. It can also transport media containing gas under negative pressure.

2. Can transport liquids containing fibers and solid particles.

3. Mechanical vibration is small, without pulsation, and runs smoothly.

4. Good self-priming and inhalation performance.

5. Can be transported in reverse.

6. Transport all media that are very viscous and contain water.